Speck P30 23 130B L

Summary

Product Identification

This document describes High-Pressure Plunger Pumps for Bentonite. The specific model detailed in the context is the P30/23-130B.

Operating Limits

• Data are for intermittent operation. Data for continuous operation are available on request.
• A safety valve must be installed in accordance with the guidelines for liquid spraying units, so that the admissible operating pressure cannot be exceeded by more than 10%.
• Pump operation without a safety valve, as well as any excess in temperature or speed limits, automatically voids the warranty.
• Cavitation must be avoided.

Model P30/23-130B

• Code No.: 00.6264
• Power Consumption: 6.0 kW
• Pressure max: 130 bar
• Pump RPM max: 750 min⁻¹
• Output max: 22.5 l/min
• Medium Temperature max: 70 °C

Feed Water

The SPECK Triplex pumps for bentonite are suitable for pumping:

• Clean water
• Water containing bentonite in a concentration of max. 25 kg of bentonite diluted in 1 m³ of water.

Electrical

• Power Consumption (P30/23-130B): 6.0 kW
• General formula for calculating power: P (bar) x Q (l/min) = kW / 475

Mechanical / Hydraulic

Model P30/23-130B

• Plunger diameter: 26 mm
• Stroke: 20 mm
• Weight approx.: 14.0 kg

Construction Characteristics

Particular features of the bentonite series pumps include:

• Crankcase of aluminium-cast (for P30) ensuring high strength and vibration damping.
• Crankshaft with cylindrical roller bearings (for P30) and plain bearing conrod, all running in oil.
• Solid ceramic plunger.
• Double plunger sealing.
• Identical suction and discharge valves, easily accessible.

Materials Used

• Valve Casing: Special brass (for P30)
• Plunger: Solid ceramic
• Valves: High-Grade Stainless Steel / PU
• Seals: Nitrile with fabric reinforcing (for P30)
• Crankshaft: Drop-forged and case-hardened

Installation Notes

• Even though SPECK-TRIPLEX pumps run almost pulsation-free, there are cases where a pressure accumulator is necessary. This will depend mainly on the construction of the unit and the conditions under which it is operated. The same effect can also be achieved by using flexible pressure lines.
• Particular care must be taken when pumping warm water.

Other Models in Series

The document provides specifications for other models in the series. See the official PDF for exact tabulated values.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror