Submersible sewage ABS XFP pumps

Summary

Product identification

The Sulzer ABS XFP 80C - 205G is a robust, reliable, submersible sewage pump designed for pumping wastewater and sewage from buildings and sites in private, commercial, industrial, and municipal areas.

• Motor Power Range: 1.3 to 30.0 kW
• Discharge Flange Sizes: DN 80, DN 100, DN 150, DN 200 radial slot DIN flange
• Identification Code Example: XFP 80C CB1.3 PE22/4-C-50

Operating limits

• Maximum Medium Temperature (continuous operation): 40 °C
• Maximum Submergence Depth: 20 m
• Explosion Protection: As standard, in accordance with ATEX 2014/34/EU [II 2G Ex h db IIB T4 Gb]

Electrical

• Motor Type: Premium Efficiency IE3, three-phase, squirrel-cage motor
• Standard Voltage: 400 V, 50 Hz, 3~
  • Optional Voltages: 230 V, 500 V, 695 V (selected motors only)
• Voltage Tolerance: ± 10%
• Poles and Speeds:
  • 2-pole (2900 r/min)
  • 4-pole (1450 r/min)
  • 6-pole (980 r/min)
• Protection Type: IP68
• Stator Insulation: Class H
• Start-up Methods:
  • Direct on line (DOL) for 1.3 - 3.0 kW motors
  • Star-delta (YΔ) for 4.0 - 30.0 kW motors and 3.0 kW 6-pole motors
• Service Factor: 1.3
• Cable Type: H07RN8-F
• Cable Length: 10 m (standard); 20 m, 30 m, 40 m, 50 m (options)
• Motor Power (P2), Power at Mains (P1), Rated Current, Speed, Cable Size, and Weight: See the official PDF for exact tabulated values for specific models.

Mechanical / hydraulic

• Construction: Compact, robust, modular design with a water-pressure-tight, encapsulated, flood-proof motor and pump section.
• Impeller Options:
  • Contrablock and Contrablock Plus for high efficiency.
  • Vortex impellers for maximum solids handling.
• Sealing System:
  • Double mechanical seals.
  • Medium Side: SiC-SiC.
  • Motor Side: SiC-C (for 80C - 150E models) and SiC-SiC (for 100G - 205G models).
  • XFP 100G - 205G models include an additional inner lipseal at the motor side.
  • All seals are independent of rotation direction and resistant to temperature shock.
• Cable Plug Solution:
  • Anti-wicking (for 80C - 150E models).
  • Water-pressure-sealed connection chamber (for 100G - 205G models).
• Bearings: Lubricated-for-life with a calculated lifetime of minimum 50,000 hrs (80C - 150E models) and 100,000 hrs (100G - 205G models).
• Shaft: Stainless steel, designed with a high safety factor to prevent fatigue fracture.
• Design Features: Smooth outer design to reduce rag build-up; stainless steel lifting hoop.
• Cooling:
  • Self-cooling (80C - 150E models).
  • By the medium (100G - 205G models).
  • Closed cooling (100G - 205G models) is an option.
• Installation: Wet-well (standard); Dry well or transportable (options).
• Monitoring:
  • Motor Temperature: Thermal sensors (140 °C) in stator windings (standard); PTC thermistor in windings (option, must be selected when pump is operated via VFD).
  • Seal Leakage: Moisture probe (DI) in motor and seal chambers (80C - 150E models) or motor chamber (100G - 205G models), signaling an inspection alert if leakage occurs.
• Standard Materials:
  • Motor Housing: Cast iron EN-GJL-250
  • Volute: Cast iron EN-GJL-250
  • Impeller: Cast iron EN-GJL-250
  • Bottom Plate: Cast iron EN-GJL-250
  • Motor Shaft: Stainless steel 1.4021 (AISI 420)
  • Lifting Hoop: Stainless steel 1.4401 (AISI 316)
  • Fasteners: Stainless steel 1.4401 (AISI 316)
  • Optional Materials: Ceramic coated volute, stainless steel 1.4470 (AISI 329), flame hardened or ceramic coated impellers and bottom plates (selected models only).

Accessories

Various accessories are available for fixed wet-well installation (e.g., automatic coupling systems, pedestals, guide rail fasteners, chain kits), dry-well installation (e.g., pump support kits, ground support stands, adapter kits), and transportable use (e.g., skirtbases). Cathodic protection (zinc anodes), leakage relays (Type ABS CA 461), and combined temperature and leakage relays (Type ABS CA 462) are also available. See the official PDF for detailed accessory information and part numbers.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror