Datasheet summary
RO-4040-FF
Engineering summary from PDF text extraction for RO-4040-FF. Verify every value with the OEM datasheet.
Summary
Product identification
FilmTec™ Sanitary RO Membranes are reverse osmosis elements designed for food and beverage water applications. These elements feature sanitary, high-rejection FT30 reverse osmosis membranes and a full-fit configuration to minimize stagnant areas. All components comply with FDA indirect food contact regulations.
- Part Number: RO-4040-FF
Product Overview
- Active Area: 90 ft² (8.36 m²)
- Stabilized Permeate Flow Rate: 2650 gpd (10.0 m³/d)
- Typical Stabilized Salt Rejection: 99.5%
Element Dimensions
- A: 40.00 in (1,016 mm)
- B: 0.75 OD in (19 mm)
- C: 3.9 in (99 mm)
Operating limits
- Membrane Type: Thin-Film Composite
- Maximum Operating Temperature: 113ºF (45ºC)
- Maximum Operating Pressure: 600 psi (41 bar)
- Maximum Differential Pressure: 15 psi (1.0 bar)
- Maximum Feed Turbidity: 1 NTU
- Free Chlorine Tolerance: Below Detectable Limits
- pH Range (Continuous Operations): 3 – 10
- pH Range (Short-Term Cleaning, 30 min): 1 – 12
- Maximum Feed Silt Density Index (SDI): 5
Mechanical / hydraulic
- Maximum pressure drop across an entire pressure vessel (housing): 60 psi (4.1 bar)
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.