Datasheet summary
HSM1000-ES
Engineering summary from PDF text extraction for HSM1000-ES. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Type: Submerged Microfiltration Membrane Bioreactor (MBR) Module
- Model: HYDRAsub®- MBR HSM1000-ES
- Configuration: Submerged Membrane
- Fiber Orientation: Vertical
- Filtrate Flow: Bi-directional
- Membrane Polymer: Polyvinylidene Fluoride (PVDF)
- Pore Size (nominal): 0.4 μm
- Number of Elements in Module: 40 (25 m² each)
- Nominal Membrane Area per Module: 10760 ft² (1000 m²)
Operating limits
- Maximum Transmembrane Pressure (Vacuum): -6 psig (-0.41 bar)
- Maximum Backwash Pressure: 2 psig (0.14 bar)
- Maximum Instantaneous Chlorine Concentration: 5,000 ppm (for a maximum of 2 hours)
- Maximum Chlorine Tolerance: 742,000 ppm-hrs (Maximum chemical tolerance for estimated life span of membrane)
- MLSS Range: 8,000 - 12,000 mg/L (in membrane tank at steady state for municipal wastewater)
- Operating Temperature Range: 41 - 104ºF (5 - 40º C)
- Feed Water pH Range: 6.0 - 8.0
- Cleaning pH Range: 1.0 - 11.0
- Operating Mode: Outside to Inside
Process conditions
- Operating Filtrate Flux: 4-20 gfd (7-34 lmh) (Depends on temperature and application)
- Peak Operating Flux: 30 gfd (51 lmh) (Depends on temperature and application)
- Chemically Enhanced Backwash (CEB) Flux: 2.4 gfd (4 lmh)
- CEB Chemicals: NaOCl (Refer to operating manual for chemical concentrations and cleaning frequencies)
- Clean In Place (CIP) Flux: 2.4 gfd (4 lmh)
- CIP Chemicals: NaOCl or Citric Acid (Refer to operating manual for chemical concentrations and cleaning frequencies)
Mechanical / hydraulic
- Permeate Connections: (2)- 3” MNPT
- Air Connections: (2)- 3” MNPT
- Guide Pipe Connections: (2)- To fit 3” pipe
- Typical Module Dry Weight: 2682 lbs (1216 kg)
- Typical Module Wet Weight: 4226 lbs (1916 kg)
- Module Cage Material: Stainless steel 304
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data for any project must match the specific OEM PDF revision used on that project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.