Datasheet summary
HSMM1200-ES
Engineering summary from PDF text extraction for HSMM1200-ES. Verify every value with the OEM datasheet.
Summary
Product identification
- Product: Submerged Ultrafiltration Membrane Module
- Model: HYDRAsub®MAX- MBR HSMM1200-ES
Module Specifications
- Configuration: Submerged Membrane
- Fiber Orientation: Vertical
- Filtrate Flow: Bi-directional
- Membrane Polymer: Polyvinylidene Fluoride (PVDF)
- Pore Size (nominal): 0.05 μm
- Number of Elements in Module: 30 (40 m² each)
- Nominal Membrane Area per Module: 12,912 ft² (1200 m²)
- Permeate Connections: (2)- 3” MNPT
- Air Connections: (2)- 2” MNPT
- Guide Pipe Connections: (2)- To fit 3” pipe
- Typical Module Dry Weight: 2343 lbs (1063 kg)
- Typical Module Wet Weight: 3400 lbs (1543 kg)
Operating limits
- Maximum Transmembrane Pressure (Vacuum): -6 psig (-0.41 bar)
- Maximum Backwash Pressure: 2 psig (0.14 bar)
- Maximum Instantaneous Chlorine Concentration: 5,000 ppma (for a maximum of 2 hours)
- Maximum Chlorine Tolerance: 742,000 ppm-hrs (maximum chemical tolerance for estimated life span of membrane)
- MLSS Range: 8,000 - 12,000 mg/L (in membrane tank at steady state for municipal wastewater)
- Operating Temperature Range: 41 - 104ºF (5 - 40º C)
- Feed Water pH Range: 6.0 - 8.0
- Cleaning pH Range: 1.0 - 11.0
- Operating Mode: Outside to Inside
Typical Process Conditions
- Operating Filtrate Flux: 4-20 gfd (7-34 lmh) (depends on temperature and application)
- Peak Operating Flux: 30 gfd (51 lmh)
- Chemically Enhanced Backwash (CEB) Flux: 2.4 gfd (4 lmh)
- CEB Chemicals: NaOCl (refer to operating manual for chemical concentrations and cleaning frequencies)
- Clean In Place (CIP) Flux: 2.4 gfd (4 lmh)
- CIP Chemicals: NaOCl or Citric Acid (refer to operating manual for chemical concentrations and cleaning frequencies)
Mechanical / hydraulic
- Cage Material: Stainless steel 304
- Connections: In English units
Disclaimer: This summary is based on the provided text extract. The original OEM PDF may contain additional figures, footnotes, or more recent revisions. Contractual data must match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.