HSMM1600-ES

Summary

Product identification

• Product Name: HYDRAsub®MAX- MBR HSMM1600-ES
• Type: Submerged Ultrafiltration Membrane Module
• Membrane Polymer: Polyvinylidene Fluoride (PVDF)
• Pore Size (nominal): 0.05 µm

Mechanical / hydraulic

• Configuration: Submerged Membrane
• Fiber Orientation: Vertical
• Filtrate Flow: Bi-directional
• Number of Elements in Module: 40 (40 m² each)
• Nominal Membrane Area per Module: 17,216 ft² (1600 m²)
• Permeate Connections: (2)- 3” MNPT
• Air Connections: (2)- 3” MNPT
• Guide Pipe Connections: (2)- To fit 3” pipe
• Typical Module Dry Weight: 2682 lbs (1216 kg)
• Typical Module Wet Weight: 4226 lbs (1916 kg)
• Operating Mode: Outside to Inside
• Note: Cage is made of stainless steel 304.

Operating limits

• Maximum Transmembrane Pressure (Vacuum): -6 psig (-0.41 bar)
• Maximum Backwash Pressure: 2 psig (0.14 bar)
• Maximum Instantaneous Chlorine Concentration: 5,000 ppm (for a maximum of 2 hours)
• Maximum Chlorine Tolerance: 742,000 ppm-hrs (maximum chemical tolerance for estimated life span of membrane)
• Operating Temperature Range: 41 - 104ºF (5 - 40º C)
• Feed Water pH Range: 6.0 - 8.0
• Cleaning pH Range: 1.0 - 11.0

Feed water

• MLSS Range: 8,000 - 12,000 mg/L (in membrane tank at steady state for municipal wastewater)

Process Conditions

• Operating Filtrate Flux: 4-20 gfd (7-34 lmh) (depends on temperature and application)
• Peak Operating Flux: 30 gfd (51 lmh)
• Chemically Enhanced Backwash (CEB) Flux: 2.4 gfd (4 lmh)
• CEB Chemicals: NaOCl (refer to operating manual for chemical concentrations and cleaning frequencies)
• Clean In Place (CIP) Flux: 2.4 gfd (4 lmh)
• CIP Chemicals: NaOCl or Citric Acid (refer to operating manual for chemical concentrations and cleaning frequencies)

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet