Datasheet summary
HSMM2400-ES
Engineering summary from PDF text extraction for HSMM2400-ES. Verify every value with the OEM datasheet.
Summary
Product identification
The HYDRAsub® MAX-MBR HSMM2400-ES is a submerged ultrafiltration membrane module.
Module specifications
- Configuration: Submerged Membrane
- Fiber Orientation: Vertical
- Filtrate Flow: Bi-directional
- Membrane Polymer: Polyvinylidene Flouride (PVDF)
- Pore Size (nominal): 0.05 µm
- Number of Elements in Module: 60 (40 m² each)
- Nominal Membrane Area per Module: 25824 ft² (2400 m²)
- Permeate Connections: (4)- 3” MNPT
- Air Connections: (4)- 2” MNPT
- Guide Pipe Connections: (2)- To fit 3” pipe
- Typical Module Dry Weight: 3517 lbs (1595 kg)
- Typical Module Wet Weight: 5634 lbs (2555 kg)
Operating limits
- Maximum Transmembrane Pressure (Vacuum): -6 psig (-0.41 bar)
- Maximum Backwash Pressure: 2 psig (0.14 bar)
- Maximum Instantaneous Chlorine Concentration: 5,000 ppma (for a maximum of 2 hours)
- Maximum Chlorine Tolerance: 742,000 ppm-hrs (maximum chemical tolerance for estimated life span of membrane)
- MLSS Range: 8,000 - 12,000 mg/L (in membrane tank at steady state for municipal wastewater)
- Operating Temperature Range: 41 - 104ºF (5 - 40º C)
- Feed Water pH Range: 6.0 - 8.0
- Cleaning pH Range: 1.0 - 11.0
- Operating Mode: Outside to Inside
Process conditions
- Operating Filtrate Flux: 4-20 gfd (7-34 lmh) (depends on temperature and application)
- Peak Operating Flux: 30 gfd (51 lmh) (depends on temperature and application)
- Chemically Enhanced Backwash (CEB) Flux: 2.4 gfd (4 lmh)
- CEB Chemicals: NaOCl (refer to operating manual for chemical concentrations and cleaning frequencies)
- Clean In Place (CIP) Flux: 2.4 gfd (4 lmh)
- CIP Chemicals: NaOCl or Citric Acid (refer to operating manual for chemical concentrations and cleaning frequencies)
Mechanical / hydraulic
The module's cage is made of stainless steel 304, unless otherwise specified. Connections are in ANSI units.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.