HYDRAcap60-DWI

Summary

Product identification

• Product Name: HYDRAcap®60-DWI Capillary Ultrafiltration Module
• Configuration: Capillary Ultrafiltration Module
• Membrane Polymer: Hydrophilic Polyethersulfone
• Nominal Membrane Area: 500 ft² (46 m²)
• Fiber Dimensions: ID 0.031” (0.8 mm), OD 0.055” (1.4 mm)
• Pore size: 0.02 micron

Product water

• Filtrate Flow: 12.1 – 29.5 gpm (2.7 – 6.7 m³/h)
• Filtrate Turbidity: ≤ 0.07 NTU
• Virus removal: ≥ 4 log
• Bacteria removal: ≥ 4 log
• Note: Typical module performance for most feedwaters.

Operating limits

• Typical Filtrate Flux Range: 35 – 85 gfd (59 – 145 l/m²/h)
• Maximum Applied Feed Pressure: 73 psig (5 bar) at 68°F (20°C)
• Maximum Transmembrane Pressure: 20 psig (1.4 bar)
• Maximum Backwash Transmembrane Pressure: 20 psig (1.4 bar)
• Instantaneous Chlorine Tolerance: 100 ppm for 15 minutes or less
• Instantaneous Hydrogen Peroxide Tolerance: 200 ppm for 15 minutes or less
• Maximum Chlorine Exposure: 200,000 ppm-hrs
• Maximum Instantaneous Feed Turbidity: 100 NTU
• Maximum Operating Temperature: 104 °F (40 °C)
• pH Operating Range: 4.0 - 10.0
• Cleaning pH Range: 1.5 – 13.0
• Operating Mode: Inside to Outside Filtration; Direct flow or Crossflow
• Backwash Flux: 100 – 150 gfd (170 – 255 l/m²/h)
• Backwash Duration: 30 – 60 seconds
• Backwash Frequency: 20 – 60 minutes
• Chemical Enhanced Backwash Frequency: 0 – 4 times per day
• Chemical Enhanced Backwash Duration: 1 – 30 minutes
• Disinfection Chemicals: NaOCl, H₂O₂, ClO₂ or NH₂Cl
• Cleaning Chemicals: NaOH, HCl, H₂SO₄, or Citric Acid
• Note: The limitations shown here are for general use. The values may be more conservative for specific projects to ensure the best performance and longest life of the membrane.

Mechanical / hydraulic

• Pipe connections: 2” Victaulic
• Dry Weight: 80 lbs (36.3 kg)
• Wet Weight: 155 lbs (70.3 kg)
• Dimensions:
  • A: 63 inches (1600 mm)
  • B: 66 1/8 inches (1680 mm)
  • C: 67 1/4 inches (1708 mm)

Certifications

• DWI Verification

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet