SanRO HS-4040

Summary

Product Identification

The SanRO®-HS series consists of Heat Sanitizable, High Rejection RO Composite Membrane Elements. They are specifically designed for high performance in USP and other high purity water systems.

• Configuration: Sanitary (Full-Fit) Spiral Wound
• Membrane Polymer: Composite Polyamide
• Outer-wraps: Sanitary, Full-fit outer-wraps eliminate “dead flow” areas for maximum bacteria control.
• Certifications:
  • Components conform to FDA regulation CFR Title 21, Part 177 and NSF 61.
  • Kosher certified.
  • Halal certified.
• Packaging: Elements are enclosed in a sealed polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box. All SanRO®-HS elements are heat set at the factory with a one hour vacuum rinse at 85°C.
• Included Components: Elements include interconnector assembly, ATDs, and one brine seal.

Operating Limits

• Maximum Applied Pressure: 600 psig (4.14 MPa)
• Maximum Chlorine Concentration: < 0.1 ppm
• Maximum Operating Temperature: 131°F (55°C)
• Maximum Sanitization Temperature: 185°F (85°C)
• Maximum Sanitization Pressure: 25 psig (0.17 MPa)
• Operating pH Range: 2.0 - 10.0
• Cleaning pH Range: 1.0 - 12.0
• Maximum Pressure Drop for a vessel: 60 psig (0.41 MPa)

Product Water

Element Performance (SanRO®-HS 4040 model):

• Nominal Permeate Flow: 2,200 gpd (8.3 m³/d)
• Nominal Rejection: 99.7% (99.4% min.)
• Test Conditions for Element Performance:
  • Applied Pressure: 225 psig (1.55 MPa)
  • Feed: 1500 mg/l NaCl
  • Recovery: 15%
  • Temperature: 77°F (25°C)

System Performance (Projected values for a 2:2:1 array system):

• Applied Pressure: 161 psig (1.11 MPa)
• Permeate TDS: 7.8 ppm
• Test Conditions for System Performance:
  • Average Flux: 15 gfd (26 lmh)
  • Feed TDS: 500 mg/l (NaCl)
  • Recovery: 80%
  • pH: 7
  • Temperature: 77°F (25°C)

Mechanical / Hydraulic

4040 Style with ATDs:

• Length (A): 40.0 inches (1016 mm)
• Diameter (B): 3.98 inches (101.1 mm)
• Core Tube (C): 0.750 inches (19.1 mm) O.D.
• Area: 90 ft² (8.4 m²)
• Core Tube Extension: 1.05 inches (26.7 mm)

---

Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

PDF datasheet