SWC-2514

Summary

Product identification

• Membrane Element: SWC-2514
• Configuration: Spiral Wound
• Membrane Polymer: Composite Polyamide
• Membrane Active Area: 5.0 ft²

Performance

• Permeate Flow: 110 gpd (0.4 m³/d)
• Salt Rejection: 99.4 % (99.0 % minimum)

Test Conditions: Elements are wet tested for quality assurance using the following conditions:

• 32000 PPM NaCl solution
• 800 psi (5.5 MPa) Applied Pressure
• 77 °F (25 °C) Operating Temperature
• 10% Permeate Recovery
• 6.5 – 7.0 pH Range (Data taken after 30 minutes of operation)

Operating limits

• Maximum Applied Pressure: 1,000 psig (6.9 MPa)
• Maximum Chlorine Concentration: < 0.1 PPM
• Maximum Operating Temperature: 113° F (45°C)
• pH Range; Continuous: 2-11
• pH Range; Cleaning: 1-13
• Maximum Feedwater Turbidity: 1.0 NTU
• Maximum Feedwater SDI (15 mins): 4.0
• Maximum Feed Flow: 6 GPM (23 l/m)
• Minimum Ratio of Concentrate to Permeate Flow for any element: 5:1
• Maximum Pressure Drop for Each Element: 10 psi

Mechanical / hydraulic

• A: 14.0 inches (355.6 mm)
• B: 2.4 inches (61 mm)
• C: 0.75 inches (19.1 mm)
• Weight: 1 lbs. (0.45 kg)
• Core tube extension: 1.10” (27.9 mm)

Notices

Minimum permeate flow for individual elements is 15 percent below listed flow. All membrane elements are supplied with a brine seal and o-rings. Most elements are packaged dry, sealed in polyethylene bags, and shipped in a cardboard box. Some elements are sealed in polyethylene bags containing less than 1.0% sodium meta-bisulfite solution and shipped in a cardboard box.

Disclaimer

This summary is based on extracted text and may miss figures, footnotes, or the latest revisions. Contractual data must always match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet