Aquadyn UE1060

Summary

Product identification

• Product Name: AQUADYN® UE1060 Hollow Fiber Module
• Filtration type: Ultrafiltration
• Membrane type: Hollow fiber
• Membrane structure: Double asymmetric
• Membrane potting: Epoxy
• Membrane material: PES
• Housing material: uPVC
• Fiber arrangement: U-Shape
• Flow type: Out/In
• Type of filtration: Dead End
• Regeneration: Back Flush, Forward Flush, Air Scouring
• Membrane area: 55 m²/592 ft²
• Hollow fiber diameter OD/ID: 1.55 mm/0.95 mm
• Pore size: 0.025 µm
• Standard preservative: Ethanol + Glycerine

Operating limits

• Applicable water flux: ≤ 6.6 m³/h (≤ 29.1 gpm)
• Capacity feed pump: ≤ 13.2 m³/h (≤ 58.1 gpm)
• Capacity back flush pump: ≤ 13.2 m³/h (≤ 58.1 gpm)
• Max. transmembrane pressure: 1 bar (14.5 psi)
• Max. module pressure: 1.2 bar (17.4 psi)
• Applicable air scour rate: 3 - 10 Nm³/h (1.8 - 5.9s cfm)
• Air pressure: < 1.2 bar (< 17.4 psi)
• Temperature range: 5 - 45°C (41 - 113°F)
• pH range, operation: 2 - 12
• pH range, cleaning: 1 - 13
• Max. TSS feed: ≤ 350 mg/L
• Max. NTU feed: ≤ 300 NTU
• Note: Operating specifications are dependent on feed water quality and operating conditions.

Mechanical / hydraulic

• Module diameter: 267 mm/10.5 in
• Module length: 1737 mm/68.4 in
• Connectors:
  • Feed port: 2” Victaulic
  • Permeate port: 2” Victaulic
  • Reject port: 2” Victaulic
  • Air inlet port: G1/2”
• Weight of module at shipping: Approx. 41 kg/90.4 lbs

---

Disclaimer: This summary is based on the provided text extract. The original PDF may contain additional figures, footnotes, or revisions not present here. Contractual data should always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet