FT50-AC-FUC1582

Summary

Product identification

• Product Name: AQUADYN FT50-AC-FUC1582
• Module Type: Hollow Fiber Module
• Filtration Type: Ultrafiltration (In to out)
• Membrane Material: Cellulose tri acetate (CTA)
• Molecular Cut-off: 150,000 Dalton
• Inner Diameter of the Fiber: 0.8 mm
• Membrane Area: 50 m²

Operating limits

• Applicable Water Flux Range: <7.3 m³/h (3.5 m³/m² day)
• Standard Inlet Feed Flow Rate: 13.7 m³/h (Under the condition of the outlet crossflow velocity of 0.2 m/s and the filtration flux of 3.0 m³/m² day)
• Backwash Flow Rate: <14.6 m³/h (7.0 m³/m² day)
• Maximum Transmembrane Pressure: 0.2 MPa
• Maximum Module Pressure: 0.2 MPa
• Maximum Temperature: 40 °C (for operation less than three months)
• Applicable pH Range: From 4 to 8

Feed water

• Standard Preservative: Aqueous sodium hypochlorite (free chlorine concentration 10 to 20 mg/L)
• Long-term Preservation: Aqueous sodium benzoic acid at the concentration of 500 mg/L

Mechanical / hydraulic

Dimensions

• A: 1360 mm
• B: Ø 272 mm
• C: 78 mm
• D: 189 mm
• E: 1240 mm

Module Components

• Hollow fibers: CTA (Cellulose tri acetate)
• Housing case: ABS (Acrylonitrile-butadiene-styrene)
• Cap: ABS
• Joint pipe A: ABS
• Joint pipe B: PP (Polypropylene)
• Drain port: Rc 1/2
• Potting resin: Urethane
• Inner pipe: ABS
• Net: PET

Connections

• Feed/Concentrate Ports: 2” Victaulic
• Permeate Port: 2” Victaulic

Weight

• Module Weight at Shipping: Approx. 35 kg

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet