SpiraSep 960 PVDF

Summary

Product identification

The MICRODYN SpiraSep™ 960-PVDF is an ultrafiltration (UF) module featuring a vacuum-driven, submerged, backwashable, spiral-wound membrane design.

• Model: MICRODYN SpiraSep™ 960-PVDF
• Membrane Chemistry: Polyvinylidene Fluoride (PVDF)
• Construction: Submerged, Negative Pressure Ultrafiltration Module
• Pore Size: 0.03 micron

Operating limits

• Transmembrane Pressure Range: 0.07 – 0.7 bar (1 – 10 psi)
• Temperature Range: 1 – 45°C (34 – 113°F)
• pH Range: 2.0 – 11.0
• Applicable Air Scour Rate: 5.6 Nm³/hr (3.5 scfm)
• Cleaning Chlorine Tolerance: 2,000 mg/L
• Maximum Feed TSS: 1,000 mg/L
• Maximum Feed Oil & Grease: 300 mg/L

Mechanical / hydraulic

• Feed Channel: 90 mil corrugated
• Membrane Area: 20.9 m² (225 ft²)
• Dimensions:
  • Dim. A: 47 mm (1.87 inches)
  • Dim. B: 1,187 mm (46.75 inches)
  • Dim. C: 249 mm (9.80 inches)
• Element Weight: 23 kg (50 lb)

Important information

• Start-up: An operational sequence incorporating permeate production, cleaning, and module draining steps is recommended. Refer to the SpiraSep 960 Product Manual (pages 10-11) for detailed sequences.
• Cleaning: Routine cleaning via backwash, chemically enhanced backwash (CEB), and clean-in-place (CIP) is necessary to ensure proper operation and prevent membrane damage. Refer to the SpiraSep 960 Product Manual (pages 12-15) for procedures.
• Storage: Modules must be stored appropriately to ensure proper operation and prevent membrane damage. Refer to the SpiraSep 960 Product Manual (pages 18-19) for instructions.

---

Disclaimer: This summary is based on the provided text extract. The full OEM PDF datasheet may contain additional figures, footnotes, or revisions. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet