Datasheet summary
Spira-Cel GY-UP-4040
Engineering summary from PDF text extraction for Spira-Cel GY-UP-4040. Verify every value with the OEM datasheet.
Summary
Product identification
This datasheet describes the SPIRA-CEL® GY-UP-4040 Series modules for Ultrafiltration.
| Membrane Type | Nominal MWCO (kDa) | Membrane Material |
|---|---|---|
| UP005 | 5 | PES |
| UP010 | 10 | PES |
| UP020 | 20 | PES |
| UP150 | 150 | PES |
Mechanical / hydraulic
- Module Dimensions:
- Outside Diameter: 101.5 mm (+0 / -2 mm tolerance)
- Length: 1016 mm (+1 / -3 mm tolerance)
- Permeate Tube Inside Diameter: 16.0 mm (± 0.1 mm tolerance)
- Spacer thickness, diamond type: 44 mil / 1.1 mm
- Membrane area: 6.0 m²
- Outer wrap: FRP shell
- All modules from GY-Series are delivered with attached ATDs.
Operating limits
Recommended operating conditions
- Prefiltration: ≤ 75 µm
- Cross flow (for water at 25 °C): 6 - 10 m³/h
- Permeate pressure: 0 bar
Allowable operating conditions
- Feed pressure, max.: 10 bar
- Retentate pressure, min.: 0.7 bar
- Transmembrane pressure, max.: 10 bar
- Permeate pressure, max.: 0.35 bar
- Pressure loss per module, max. (∆pmax):
- 5 - 50 °C: 2 bar
- 50 - 65 °C: 1.3 bar
- 65 - 80 °C: 0.5 bar
- Pressure loss per housing, max. at 80 °C: 2 bar
- Processing temperature: 5 - 80 °C
- pH range during filtration: 2 - 11
- pH range during CIP: 1 - 12
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must always match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.