MP025-0300-UF010 UF module

Summary

Product identification

The MP025-0300 UF010 is a hollow fiber ultrafiltration module, described as a tight ultrafiltration module for water and wastewater applications. It is suitable for potable water production, reverse osmosis (RO) pretreatment, municipal and industrial wastewater treatment in lab-scale test units.

These modules excel in removing colloidal silica, turbidity, suspended solids, and virus and bacteria. They offer outstanding pH and chlorine resistance and excellent mechanical strength of the fibers, allowing operation at higher transmembrane pressure than competing products. The MP025-0300 UF010 modules can be used as a final polishing step, for example, to remove colloidal silica from boiler feed water or in the soft drink industry.

Operating limits

• Typical flux: 50 – 100 l/m²/h (30 – 60 gfd)
• Max. system pressure: 10 bar (145 psi)
• Max. filtration transmembrane pressure: 6 bar (87 psi)
• Max. backwash pressure: 4 bar (58 psi)
• Max. active chlorine concentration: 500 ppm @ pH>10
• Max. cumulative active chlorine exposure: 250,000 ppm-hours @ pH>10
• Max. particle size: 150 µm
• Max. TSS: 300 ppm
• Max. turbidity: 150 NTU
• Max. Temperature during operation & cleaning: 40°C (104°F)
• pH range during operation: 2-12
• pH range during cleaning: 1-13

Feed water

• Max. particle size: 150 µm
• Max. TSS: 300 ppm
• Max. turbidity: 150 NTU

Membrane characteristics

• Membrane material: Modified PES
• Membrane fiber inner diameter: 0.7 mm (0.028”)
• Molecular Weight Cut Off (MWCO): 10 kDa¹
• Filtration mode: Inside-Out; Vertical
• Operation mode: Dead-end or cross-flow

¹ MWCO is an estimation as it depends on size, shape, charge and polarity of the compound being tested, as well as test conditions. Measured with PEG.

Mechanical / hydraulic

• Membrane Surface Area: 0.050 m²

Materials of Construction

• Housing: PVC transparent
• Internals: None
• Potting: Epoxy resin

Dimensions

• L1.0: 300 mm (11.81”)
• L1.1: 226 mm (8.90”)
• D1.0: 25 mm (0.98”)
• D1.1: 24 mm (0.95”)

Available Module types

• MP025-0300UEMF-UF010-080PSN

Assembly Components (not included in scope of supply)

• Stainless steel holder MP025-0300
• PP end cap BSP or NPT
• EPDM O-Ring 23.39x3.53 mm

Storage Information

New modules in original packaging can be stored for a maximum of 1 year from the shipping date in a dry place, protected from sunlight or any heat source, at temperatures between 1 and 40°C (33 and 104°F). The ex-factory storage solution consists of: 84wt% water, 15wt% glycerin, and 1wt% sodium metabisulfite.

---

Disclaimer: This summary is based on the provided text extraction and may not include all figures, footnotes, or revisions present in the official OEM PDF. For contractual data, please refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet