OLTREcap-1030-V

Summary

Product identification

The OLTRECAP-V Series consists of Outside-In Air Scour Ultrafiltration Membranes.

• Membrane Material: PVDF
• Membrane Configuration: Capillary
• Normalized Filtration Pore Size: 0.075 µm
• Potting Material: Epoxy (soft layer for protection)
• Housing Material: PVC/ABS
• Membrane ID/OD: 0.9/1.4 mm (0.035/0.055”)
• Preservative: Glycerin (35%)

Available Models

• OLTRE CAP -1030-V: 32.5 m² (403.6 ft²) membrane area
• OLTRE CAP -1060-V: 70 m² (753.2 ft²) membrane area
• OLTRE CAP -1080-V: 95 m² (1022.5 ft²) membrane area

Operating limits

• Typical Filtrate Flux: 50-120 L/m²h (29-71 GFD)
• Maximum Applied Feed Pressure: 0.5 MPa (73 psi)
• Maximum Transmembrane Pressure (TMP): 0.2 MPa (30 psi)
• Maximum Backwash Pressure: 0.2 MPa (30 psi)
• CIP Chlorine Concentration: 2000 ppm
• Operating Temperature: 5-45°C (41-113°F)
• Operating pH Range: 1-10
• Operation Mode: Dead-end or Cross flow, Interval or continuous air scrubbing
• Backwash Flux: 70-150 L/m²h (41-88 GFD)
• Backwash Duration: 30-120 seconds
• Backwash Frequency: 15-60 minutes
• CEB Frequency: Minimum one time per day
• CEB Duration: 2-20 minutes
• Cleaning Chemicals: NaCIO or H₂O₂, NaOH, HCL, citric acid or oxalic acid
• Low Operation Pressure: Designed to run at pressures as low as 0.02 MPa (3.0 psi)

Mechanical / hydraulic

Module Dimensions

See the official PDF for exact tabulated values including column descriptions (A through H).

• OLTRE CAP -1030-V: 800 mm (31.5”) length, 750 mm (29.6”) B, 858 mm (33.8”) C, Ø250 mm (Ø9.8”) D, 172 mm (6.8”) E, Ø277 mm (Ø10.9”) F, 40 mm (Ø1.6”) G, 75 mm (3.0”) H
• OLTRE CAP -1060-V: 1600 mm (63.0”) length, 1500 mm (59.1”) B, 1715 mm (67.5”) C, Ø250 mm (Ø9.8”) D, 172 mm (6.8”) E, Ø277 mm (Ø10.9”) F, 40 mm (Ø1.6”) G, 75 mm (3.0”) H
• OLTRE CAP -1080-V: 2100 mm (82.7”) length, 2000 mm (78.7”) B, 2215 mm (87.2”) C, Ø250 mm (Ø9.8”) D, 172 mm (6.8”) E, Ø277 mm (Ø10.9”) F, 40 mm (Ø1.6”) G, 75 mm (3.0”) H

Connections: Feed, Permeate and Concentrate pipe connections are all VICTAULIC 2".

Product Features

• Robust Membrane: Made by "complex Thermally Induced Phase Separation" (c-TIPS) technology, providing high crystallinity for chemical resistance, mechanical strength, and longer lifetime.
• Permanently Hydrophilic Membrane: PVDF UF membrane remains hydrophilic permanently, offering steady flux by preventing loss of hydrophilicity due to polymer reconfiguration.
• Oxidation-inert Membrane: PVDF polymer allows thorough cleaning with strong oxidants due to chemical inertness.
• Internal Air Channels: Individual air diffusers blow air evenly through the membrane bundle, effectively scrubbing away pollutants.
• Soft Potting: A soft layer of potting material protects the weakest portions of the capillaries ("roots") from breakage during operation.

Applications

OLTRE CAP –V membrane modules can be used for:

• Purifying well and surface water for drinking applications.
• Filtering sewage and wastewater for water recycle.
• Treating surface or seawater for Reverse Osmosis (RO) and Nanofiltration (NF) systems.

---

Disclaimer: This summary is based on the provided text extraction. It may not include all figures, footnotes, or the latest revisions present in the official PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet