Datasheet summary
OLTREcap-0640-M
Engineering summary from PDF text extraction for OLTREcap-0640-M. Verify every value with the OEM datasheet.
Summary
Product Identification
These are OLTRESUB-M Submerged MBR Membrane Modules.
- Membrane Material: PVDF
- Membrane Configuration: Capillary
- Normalized Filtration Pore Size: 0.075µm
- Potting Material: Epoxy
- Housing Material: PVC/ABS
- Membrane ID/OD: 0.9/1.5 mm (0.035/0.059”)
- Preservative: Glycerin (35%)
Module Specifications:
- OLTRESUB-0640-M: 14m² (150.7 ft²) membrane area
- OLTRESUB-0660-M: 22m² (236.8 ft²) membrane area
- OLTRESUB-0680-M: 30m² (322.9 ft²) membrane area
Special Features:
- Robust Membrane: Uses "Complex Thermally Induced Phase Separation" (c-TIPS) technology for high crystallinity, exceptional chemical resistance, mechanical strength, and longer lifetime.
- Permanently Hydrophilic Membrane: Ensures steady flux by fixing hydrophilicity permanently through an innovative cross-link technology, preventing loss of hydrophilicity.
- Low Operation Pressure: Designed to run at pressures as low as 0.02 MPa (3.0 psi).
- Oxidation-inert Membrane: PVDF polymer allows thorough cleaning with strong oxidants.
- Internal Air Channels: Individual air diffusers below each module ensure even air bubbling to scrub away pollutants.
- Soft Potting: A soft layer of potting material protects the "roots" of the capillaries, which are the weakest portions of the membrane modules.
Application:
OLTRE SUB membrane modules are suitable for:
- Waste water treatment by membrane bioreactor process.
- Waste water treatment by enhanced bioreactor process.
- Waste water recovery from waste water.
- Enhanced drinking water treatment.
Operating Limits
- Typical Filtrate Flux: <50 L/m²h (<85 GDF)
- Maximum Applied Feed Pressure: 0.05 - 0.05 MPa (-7.3-7.3psi)
- Maximum TMP: 0.2 MPa (30psi)
- Maximum Backwash Pressure: 0.2 MPa (30psi)
- CIP Chlorine Concentration: 2000ppm
- Operating Temperature: 10-40°C (50-104°F)
- Operating pH Range: 1-10
- Operation Mode: Outside-in, direct Flow, Cross flow, continues air scrubbing
Typical Process Conditions
- Backwash Flux: 70-150 L/m²h (19-255 GFD)
- Backwash Duration: 30-120 seconds
- Backwash Frequency: 15-60 minutes
- CEB Frequency: 0-24 times per day
- CEB Duration: 2-20 minutes
- Cleaning Chemicals: NaClO, NaOH, HCl, citric acid or oxalic acid
Mechanical / Hydraulic
Module Dimensions:
| Model | A | B | C | D | H | I | O |
|---|---|---|---|---|---|---|---|
| OLTRESUB-0660-M | 1375mm (54.1”) | 1590mm (62.6”) | 95mm (3.7”) | 120mm (4.7”) | 158mm (6.2”) | φ 30mm (φ1.18”) | φ 40mm (φ1.57”) |
| OLTRESUB-0680-M | 1875mm (73.8”) | 2090mm (82.3”) | 95mm (3.7”) | 120mm (4.7”) | 158mm (6.2”) | φ 30mm (φ1.18”) | φ 40mm (φ1.57”) |
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.