Parker EP Ultra Spiral Elements

Summary

Product Identification

EP Ultrafiltration Spiral Elements are designed for extended life in various industrial and electrocoat applications. They offer high resistance to fouling from colloidal particles and oily contamination. The Polyvinylidene Fluoride (PVDF) membrane provides superior chemical and temperature resistance across diverse process conditions.

The membrane has no electrical charge, making it suitable for use with both Anodic and Cathodic electrocoat paints. These elements are resistant to fouling by contamination or color pigments. Element construction is developed for extended life in industrial applications, with increased resistance to oxidizing cleaning agents.

Materials of Construction:

• Membrane: Polyvinylidene Fluoride
• Backing Material: Polyester
• Permeate Tube: Polyvinyl Chloride (PVC)
• Seal Carrier: ABS Plastic
• Brine Seal: EPDM

Benefits:

• Available in sealed (low flow) or netted (high flow) design.
• Membrane has no electrical charge and can be used on either Anodic or Cathodic electrocoat paints.
• Resistant to fouling due to contamination or color pigments.
• Element construction developed for extended life in industrial applications.
• Available in standard diameter or custom-sized configurations for maximum performance and optimal cleaning.
• Increased resistance to oxidizing cleaning agents.
• Available in many configurations to retrofit competitive elements.

Applications:

• Anodic/Cathodic Paint
• Select Water Borne Paints
• Waste Water Recycle
• Alkaline Cleaner Recovery
• PVA Recovery

Operating Limits

• Maximum Inlet Pressure: 60 psi (4.1 bar)
• Typical Inlet Pressure: 40-60 psi (2.7-4.1 bar) (application specific)
• Maximum Operating Temperature: 122°F (50°C)
• pH Range, continuous: 2-10
• pH Range, short-term cleaning: 2-11.5 @122°F (50°C)

Mechanical / Hydraulic

EP Ultrafiltration Spiral Elements are available in various part numbers, diameters, body lengths, and active membrane areas, configured for specific housings or replacement scenarios. Configurations include "taped (test use)" and "sealed" elements, with some "netted" options for high flow.

See the official PDF for exact tabulated values, including specific part numbers, diameters (in/cm), body lengths (in/cm), and active membrane areas (ft²/m²).

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet