TR-2012-100

Summary

Product identification

• Model: TR-2012
• Description: 2.0 x 12 Inch - Home Drinking Water RO Membranes
• Membrane Type: Aromatic Polyamide Composite
• Element Configuration: Spiral Wound, Tape Wrap

Performance Specifications

Test Conditions

Performance is measured under the following conditions:

• Temperature: 25 °C (77 °F)
• Feed Solution, Concentration: Tap water, 300 ppm
• Feed Pressure: 4.5 bar (65 psi)
• Brine : Permeate ratio: 5 : 1
• Feed pH: 6.5 - 7.5
• Measurement: Average value for 100 elements after 1 hour operation.

Performance by Model

Note: Minimum rejection is 96%, and minimum flow is -15% for any single element.

Operating Limits

• Recommended Operating Pressure: 4.5 bar (65 psi)
  • Maximum operating pressure: 8.6 bar (124 psi)
• Operating Temperature: < 35 °C (95 °F)
  • Maximum operating temperature: 45 °C (113 °F)
• Feedwater Turbidity (SDI₁₅): < 4
  • High flux operation with feedwater turbidity > 3 or 4 SDI₁₅ may require frequent cleaning.
• Feedwater Chlorine Concentration: 0 ppm
  • Permissible up to < 1’000 ppm·h at < 0.1 ppm Cl₂ in the absence of heavy metals.
• pH Range: 2 - 11
  • Both feed and brine water must meet this range.
• Brine/Permeate Flow Ratio: 5 : 1 (for each single element)

Mechanical / Hydraulic

• All Dimensions shown in inches and mm:
  • Overall length: 11.5” (293 mm)
  • Permeate tube length: 10.4” (264 mm)
  • Diameter: 2.2” (55 mm)
  • Permeate tube diameter: 0.75” (19 mm)
  • Inlet/outlet connection diameters: 0.4” (10 mm), 1.87” (47.5 mm), 0.68” (17.2 mm)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet