Pure HiTemp HTN

Summary

Product Identification

The Pure HiTemp depth filter is a meltblown Nylon filter designed for extremely high temperature and high viscosity applications.

Key features include:

• 100% Nylon media with nylon core for greater strength and temperature resistance.
• No resin binders, lubricants, antistatic, or release agents; melt bonded exterior ensures no media migration.
• Provides lower total cost of filtration.
• Wide chemical compatibility.

Typical applications include:

• High temperature and high viscosity solutions
• Paints, coatings, printing inks
• Fuels and lubricating oils
• Solvents
• Hot, non-aqueous fluids

Nominal Micron Ratings available:

• 1 µm
• 5 µm
• 10 µm
• 25 µm
• 50 µm
• 75 µm
• 100 µm
• 125 µm
• 150 µm
• 200 µm

Operating Limits

Maximum pressure drop (Nylon Core):

• 60 psid (4.0 bar) @ 122°F (50°C)
• 15 psid (1.0 bar) @ 176°F (80°C)
• 7.5 psid (0.5 bar) @ 302°F (150°C)

Recommended change-out pressure drop:

• 25 psid (1.4 bar) @ 77°F (25°C)

Mechanical / Hydraulic

Dimensions:

• Inner Diameter: 1.1 in (2.8 cm)
• Outer Diameter: 2.5 in (6.4 cm)
• Lengths:
  • 9 ¾ in (24.5 cm)
  • 10 in (25.4 cm)
  • 19 ½ in (49.5 cm)
  • 20 in (50.8 cm)
  • 29 ¼ in (74.3 cm)
  • 30 in (76.2 cm)
  • 39 in (99.1 cm)
  • 40 in (101.6 cm)

Materials of Construction:

• Filter Media: Meltblown Nylon
• Adapters: Nylon
• Elastomer: Buna, Silicone, Viton

Filtration Performance

Removal efficiency is based on a modified ASTM 795 procedure. The efficiency of nominal filters varies by application, as nominal-rated filters have a wider distribution of pore sizes and rejected particle sizes. Nominal rating is primarily used to compare efficiencies across a filter family, with efficiency dependent on particle shape, size, composition, application, and testing protocol.

Clean water flow rate information is presented graphically for 10-inch length filters based on differential pressure. See the official PDF for exact tabulated values and graphs.

Quality and Certifications

Pure HiTemp filters are manufactured under a quality management system certified to meet ISO 9001 standards. Each filter is assigned a lot code to ensure traceability. Filters are designed and manufactured for resistance to a wide range of chemical solutions, though users should verify chemical compatibility for specific applications.

Ordering Information

To order, specify the Type, Micron Rating, Cartridge Length, End #1 Adapter, End #2 Adapter, and Elastomer Material. An example format is HTN 01-40-ESS.

Available options:

• Type: HTN (Nylon core)
• Micron Rating (nominal): 01 (1 µm), 05 (5 µm), 10 (10 µm), 25 (25 µm), 50 (50 µm), 75 (75 µm), 100 (100 µm), 125 (125 µm), 150 (150 µm), 200 (200 µm)
• Cartridge Length: 9 ¾ in (24.5 cm), 10 in (25.4 cm), 19½ in (49.5 cm), 20 in (50.8 cm), 29¼ in (74.3 cm), 30 in (76.2 cm), 39 in (99.1 cm), 40 in (101.6 cm)
• End #1 Adapter: A (Open end w/gasket), E (222 O-Ring), F (226 O-Ring), X (Standard Plain End (no gasket))
• End #2 Adapter: A (Open end w/gasket), H (Fin), S (Solid End), X (Standard Plain End (no gasket))
• Elastomer Material: B (Buna), S (Silicone), V (Viton)

---

Disclaimer: This summary is based on the extracted text and may not include all figures, footnotes, or the latest revisions found in the complete OEM PDF datasheet. For contractual data, please refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet