Datasheet summary
V6 PVDF 500kDa
Engineering summary from PDF text extraction for V6 PVDF 500kDa. Verify every value with the OEM datasheet.
Summary
Product identification
Industrial UF Spiral-Wound E-Coat Element: V6 (PVDF 500kDa)
- Membrane Type: Proprietary PVDF
- Polymer: PVDF
- Approx. Molecular Weight Cutoff: 500,000 Dalton
Operating limits
- Typical Operating Flux: 5-35 GFD (8-60 LMH)
- Membrane Temperature:
- Continuous Operation: 122°F (50°C)
- Clean-In-Place (CIP): 110°F (43.3°C)
- pH Range:
- Continuous Operation: 1-11
- Clean-In-Place (CIP): 2-10.5
- Maximum Pressure Drop:
- FRP Element: 35psi (241kPa)
- Net Wrap Element: 17psi (117kPa)
- Chlorine Tolerance: 180ppm maximum per cleaning cycle
Feed water
- Recommended Element Cross Flow Rate:
- 1.8” Element:
- 24 mil feed spacer: 1 m³/hr (3 gpm)
- 31 mil feed spacer: 1 m³/hr (3 gpm)
- 46 mil feed spacer: 1 m³/hr (4 gpm)
- 65 mil feed spacer: 1 m³/hr (4 gpm)
- 80 mil feed spacer: 1 m³/hr (5 gpm)
- 2.5” Element:
- 24 mil feed spacer: 1 m³/hr (6 gpm)
- 31 mil feed spacer: 2 m³/hr (7 gpm)
- 46 mil feed spacer: 2 m³/hr (8 gpm)
- 65 mil feed spacer: 2 m³/hr (9 gpm)
- 80 mil feed spacer: 2 m³/hr (9 gpm)
- 4.0” Element:
- 24 mil feed spacer: 3 m³/hr (15 gpm)
- 31 mil feed spacer: 4 m³/hr (17 gpm)
- 46 mil feed spacer: 5 m³/hr (20 gpm)
- 65 mil feed spacer: 5 m³/hr (23 gpm)
- 80 mil feed spacer: 5 m³/hr (24 gpm)
- 8” Element:
- 24 mil feed spacer: 15 m³/hr (66 gpm)
- 31 mil feed spacer: 17 m³/hr (75 gpm)
- 46 mil feed spacer: 20 m³/hr (89 gpm)
- 65 mil feed spacer: 23 m³/hr (99 gpm)
- 80 mil feed spacer: 24 m³/hr (105 gpm)
- Note: The recommended cross flow rate will be subject to differential pressure limitations and specific applications.
- 1.8” Element:
Mechanical / hydraulic
- Membrane Construction: Round shell net or FRP
- Element Dimensions & Weight:
| Model # | Body Length (mm) | Element OD (mm) | Perm Tube ID (mm) | Perm Tube OD (mm) | Tube Ext Length | Feed Rate GPM (lpm) | Standard Housing |
|---|---|---|---|---|---|---|---|
| 1812TM | 10.00” (254) | 1.8” (46) | 0.675” (17) | 0.75” (perm) 1.0” (plug) | 2.0 (7.6) | IH-1812 | |
| 2519H | 19.25” (489) | 2.5” (63.5) | 0.62” (15.8) | 6.0 (23) | IH-2519 | ||
| 2540H | 38.00” (965.2) | 2.5” (63.5) | 0.75” (19.1) | 1.00” (both ends) | 6.0 (23) | IH-2540 | |
| 3940AH | 38.80” (985.5) | 3.93” (99.8) | 0.827” (21) | 0.60” (both ends) | 25 (95) | ||
| 3945H | 45.00” (1143) | 3.93” (99.8) | 0.62” (15.8) | 25 (95) | |||
| 4030H | 27.0” (658.8) | 3.93” (99.8) | 0.84” (21.3) | 3.00” (perm) 3.63” (plug) | 25 (95) | IH-4030 | |
| 4032H | 29.50” (749.3) | 3.93” (99.8) | 0.75” (19.1) | 1.06” (both ends) | 25 (95) | ||
| 4033H | 33.00” (838.2) | 3.93” (99.8) | 0.62” (15.8) | 25 (95) | |||
| 4037H | 27.00” (685.8) | 3.93” (99.8) | 0.84” (21.3) | 3.00” (perm) 8.625” (plug) | 25 (95) | IH-KR4 | |
| 4040AH | 40.00” (1016) | 3.93” (99.8) | 0.62” (15.8) | 25 (95) | |||
| 4040BH | 40.00” (1016) | 3.93” (99.8) | 0.76” (19.3) | 25 (95) | |||
| 4045BH | 40.00” (1016) | 3.93” (99.8) | 0.84” (21.3) | 3.00” (perm) 1.875” (plug) | 25 (95) | IH-4042 | |
| 4045CH | 45.00” (1143) | 3.93” (99.8) | 0.62” (15.8) | 25 (95) | |||
| 4051.5H | 40.00” (1016) | 3.93” (99.8) | 0.84” (21.3) | 3.00” (perm) 8.50” (plug) | 25 (95) | IH-40RF | |
| 5640H | 40.00” (1016) | 5.60” (142.2) | 1.29” (32.8) | 40 (151) | |||
| 5647.5H | 40.00” (1016) | 5.60” (142.2) | 1.66” (42.2) | 3.00” (perm) 4.375” (plug) | 40 (151) | IH-60A | |
| 5651.5H | 40.00” (1016) | 5.60” (142.2) | 1.66” (42.2) | 3.00” (perm) 8.375” (plug) | 40 (151) | IH-60RF | |
| 7637H | 33.00” (838.2) | 7.45” (189.2) | 1.66” (42.2) | 2.00” (both ends) | 70 (265) | ||
| 7640HB | 40.00” (1016) | 7.28” (184.9) | 1.29” (32.7) | 70 (265) | |||
| 7640HC | 40.00” (1016) | 7.28” (184.9) | 1.29” (32.7) | 70 (265) | |||
| 7647.5HB | 40.00” (1016) | 7.45” (189.2) | 1.66” (42.2) | 3.00” (perm) 4.375” (plug) | 70 (265) | IH-80S | |
| 7647.5HC | 40.00” (1016) | 7.28” (184.9) | 1.66” (42.2) | 3.00” (perm) 4.375” (plug) | 70 (265) | IH-80D(C,E) | |
| 7940HA | 38.25” (717.6) | 7.90” (200.7) | 1.66” (42.2) | 0.875” (both ends) | 80 (303) | ||
| F7940HA | 40.00” (1016) | 7.90” (200.7) | 1.139” (28.9) | 80 (303) | |||
| 8040H | 40.00” (1016) | 7.90” (200.7) | 1.125” (28.6) | 80 (303) |
- Membrane Area (SQ. FT):
| Element | 24 mil feed spacer | 31 mil feed spacer | 46 mil feed spacer | 65 mil feed spacer | 80 mil feed spacer |
|---|---|---|---|---|---|
| 1812TM | 3.1 | 2.7 | 2.1 | 1.6 | 1.3 |
| 2540M | 26 | 22 | 19 | 14 | 12 |
| 2540F | 27 | 23 | 20 | 15 | 13 |
| 4040M | 77 | 67 | 54 | 43 | 36 |
| 4040F | 79 | 69 | 56 | 45 | 38 |
| 8040F | 365 | 317 | 250 | 193 | 166 |
Common applications
- Cathodic electrocoat paint
- Industrial water processes
V-Series Features & Benefits
- Proprietary positive charge to repel paint particles, promote maximum flux rates, and reduce fouling.
- Membrane requires one cleaning chemical plus acid; no other additives required.
- Integrated end plugs allow for easy integration and removal.
- Synder maintains a large portion of E-Coat devoted sales, engineering, and staff compared to other membrane manufacturers worldwide.
Comprehensive technical support
- Paint/MEQ Analysis
- On-site Flow Analysis
- UF System Optimization
- Anolyte System Optimization
- Personalized Technical Support
Technical notes
For element sizes not listed, Synder Filtration can design an element to fit exact needs. Customers should specify the element outer diameter (OD) or vessel/housing inner diameter (ID), element inner diameter (ID), and length. Additional feed spacers are also available.
Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.