Datasheet summary
HFU-1010N
Engineering summary from PDF text extraction for HFU-1010N. Verify every value with the OEM datasheet.
Summary
Product identification
The HFU-1010N is a Pressurized Outside to In / Dead-end Filtration Ultrafiltration (UF) Membrane Module. It features a Toray PVDF membrane construction, which is highly resistant to chlorine and strong acids, allowing for better cleaning and optimized filtration flux rates. This hollow fiber module effectively removes suspended solids, viruses, and bacteria and is certified for drinking water applications. The HFU-1010N model is designed for small capacity equipment.
Membrane Characteristics
- Membrane Material: PVDF (Polyvinylidene fluoride)
- Nominal Pore Size: 0.01 µm
- Outer Membrane Surface Area: 7 m² (75 ft²)
Operating limits
- Maximum Feed water / Filtrate Flow: 1.2 m³/h (5.1 gpm)
- Maximum Backwash Flow: 1.3 m³/h (5.7 gpm)
- Maximum Air Flow: 2.2 Nm³/h (1.3 scfm)
- Maximum Inlet Pressure: 300 kPa (43.5 psi)
- Maximum Backwash Pressure: 300 kPa (43.5 psi)
- Normal Operating Transmembrane Pressure: 0–200 kPa (0–29 psi)
- Operating Temperature Range: 0–40 °C (32–104 °F)
- pH Range:
- During Filtration: 1–10
- During Cleaning: 0–12
Mechanical / hydraulic
- Material Specifications:
- Casing: uPVC
- Cap: uPVC
- Potting: Epoxy
- O-ring: NBR
- Dimensions:
- Diameter: 114 mm (4.49 in)
- Length: 1,078 mm (3.537 ft)
- Weight:
- Full of Water: 15 kg (33 lbs)
- After Draining: 9 kg (20 lbs)
- Connections:
- (A) Filtrate Outlet: IDF/ISO Clamp Union Fitting 1.5S
- (B) Air Outlet: IDF/ISO Clamp Union Fitting 1.5S
- (C) Feed Water / Air Inlet: IDF/ISO Clamp Union Fitting 1.5S
Applications
- Drinking water
- Industrial process water
- Pretreatment for seawater RO desalination
- Tertiary wastewater
Product Certifications & Compliances
- Association of Membrane Separation Technology of Japan
Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the most recent revisions of the OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.