SUL-G10TS

Summary

Product identification

• Model: SUL-G10TS
• Membrane Type: Cross Linked Fully Aromatic Polyamide Composite
• Element Configuration: Spiral Wound
• Nominal Membrane Surface Area: 7 m² (75 ft²)
  • Note: This is a nominal value and not a guaranteed specification.

Performance specifications

• Salt Rejection: 99.5 % (99.0 % minimum)

• Product Flow Rate: 5 m³/day (1300 gpd)

  • Note: 4.3 m³/day (1100 gpd) minimum for any single element.

• Test Conditions:

  • Feed Water Pressure: 0.75 MPa (110 psi)
  • Feed Water Temperature: 25 °C (77 °F)
  • Feed Water Concentration: 500 mg/L as NaCl
  • Brine Flow Rate: 20 L/min (5.3 gpm)
  • Feed Water pH: 6.5

Operating limits

• Maximum Feed Water Pressure: 4.1 MPa (600 psi)
• Maximum Sanitization Temperature: 85 °C (185 °F)
• Recommended Feed Water Pressure: <1.0 MPa (150 psi)
• Recommended Feed Water Temperature: <35 °C (95 °F)
• Recommended Feed Water Turbidity (SDI): <4 (measured according to ASTM D4189)
• Recommended Feed Water pH Range, Continuous Operation: 3 – 9
• Recommended Feed Water pH Range, Chemical Cleaning: 2 – 11
• Recommended Feed Flow Rate per Vessel: <50 L/min (13 gpm)
• Recommended Brine Flow Rate per Vessel: >10 L/min (2.6 gpm)
• Recommended Brine/Permeate Flow Ratio: >6
• Recommended Pressure Drop (per Element): <0.10 MPa (14 psi)
• Recommended Pressure Drop (per Vessel): <0.20 MPa (29 psi)
• Cleaning Condition: Element(s) must be cleaned when pressure drop increases up to 1.5 times of initial value.

Mechanical / hydraulic

• Dimensions:
  • Overall Length: 1016 mm
  • Outer Diameter: φ101 mm
  • Permeate Tube Diameter: φ21 mm
  • Other dimensions: 15 mm, 15 mm, 22 mm.
  • Note: All dimensions shown in millimeters. See the official PDF for a detailed diagram.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the OEM datasheet. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet