SUL-G20P

Summary

Product Identification

• Model: SUL-G20P
• Description: Low elution, easy to rinse and energy saving
• Membrane Type: Cross Linked Fully Aromatic Polyamide Composite
• Element Configuration: Spiral Wound

Performance Specification

• Product Flow Rate: 32 m³/day (8500 gpd)
• Minimum Product Flow Rate: 28 m³/day (7400 gpd) (for any single element)

Test Conditions

• Feed Water Pressure: 0.75 MPa (110 psi)
• Feed Water Temperature: 25 °C (77 °F)
• Feed Water Concentration: Pure water
• Brine Flow Rate: 80 L/min. (2 gpm)

Operating Limits

• Maximum Feed Water Pressure: 4.1 MPa (600 psi)
• Maximum Feed Water Temperature: 45 °C (113 °F)
• Recommended Feed Water Pressure: < 1.5 MPa (214 psi)
• Recommended Feed Water Temperature: < 35 °C (95 °F)
• Feed Water pH Range, Chemical Cleaning: 2 – 11
• Recommended Feed Flow Rate per Vessel: < 200 L/min. (52 gpm)
• Recommended Brine Flow Rate per Vessel: > 40 L/min. (11 gpm)
• Recommended Pressure Drop (per Element): < 0.10 MPa (14 psi)
• Recommended Pressure Drop (per Vessel): < 0.20 MPa (29 psi)

Mechanical / Hydraulic

A diagram in the source PDF indicates dimensions in millimeters, including values such as φ201, φ32, 1016, 11, and 22. Flow directions for Permeate, Feed Water, and Concentrated Brine are also depicted. See the official PDF for exact tabulated values and specific dimension assignments.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must always match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet