Pure HiTemp HTN

Summary

Product identification

Pure HiTemp depth filters are meltblown Nylon filters designed for extremely high temperature and high viscosity applications.

Features and benefits:

• 100% Nylon media with nylon core for greater strength and temperature resistance
• No resin binders, lubricants, antistatic or release agents; melt bonded exterior ensures no media migration
• Provides lower total cost of filtration
• Wide chemical compatibility

Applications

• High temperature and high viscosity solutions
• Paints, coatings, printing inks
• Fuels and lubricating oils
• Solvents
• Hot, non-aqueous fluids

Efficiency information

Removal efficiency is based on a modified ASTM 795 procedure. Efficiency of nominal filters varies by application. Nominal-rated filters have a wider distribution of pore sizes and rejected particle sizes, primarily used to compare efficiencies across a filter family. Efficiency is dependent on particle shape, size, composition, application, and testing protocol. Absolute-rated filters are designed and tested to reject at least 99% of particles of the listed micron size.

Specifications

• Micron Ratings (nominal): 1, 5, 10, 25, 50, 75, 100, 125, 150, 200 microns
• Inner Diameter: 1.1 in (2.8 cm)
• Outer Diameter: 2.5 in (6.4 cm)
• Lengths:
  • 9 ¾ in (24.5 cm)
  • 10 in (25.4 cm)
  • 19 ½ in (49.5 cm)
  • 20 in (50.8 cm)
  • 29 ¼ in (74.3 cm)
  • 30 in (76.2 cm)
  • 39 in (99.1 cm)
  • 40 in (101.6 cm)

Materials of Construction

• Filter Media: Meltblown Nylon
• Adapters: Nylon
• Elastomer: Buna, Silicone, Viton

Performance Conditions

• Maximum pressure drop (Nylon Core):
  • 60 psid (4.0 bar) @ 122°F (50°C)
  • 15 psid (1.0 bar) @ 176°F (80°C)
  • 7.5 psid (0.5 bar) @ 302°F (150°C)
• Recommended change-out pressure drop: 25 psid (1.4 bar) @ 77°F (25°C)

Quality / Certifications

Pure HiTemp filters are manufactured under a quality management system certified to meet ISO 9001 standards. Each filter is assigned a lot code for traceability. SUEZ filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions, but users should verify chemical compatibility for specific applications.

Ordering information

The ordering information uses a code system for customization (e.g., HTN 01-40-ESS).

• Type: HTN = Nylon core
• Micron Rating (nominal):
  • 01 = 1 µm
  • 05 = 5 µm
  • 10 = 10 µm
  • 25 = 25 µm
  • 50 = 50 µm
  • 75 = 75 µm
  • 100 = 100 µm
  • 125 = 125 µm
  • 150 = 150 µm
  • 200 = 200 µm
• Cartridge Length:
  • 9 3/4 in (24.5 cm)
  • 10 in (25.4 cm)
  • 19½ in (49.5 cm)
  • 20 in (50.8 cm)
  • 29¼ in (74.3 cm)
  • 30 in (76.2 cm)
  • 39 in (99.1 cm)
  • 40 in (101.6 cm)
• End #1 Adapter:
  • A = Open end w/gasket
  • E = 222 O-Ring
  • F = 226 O-Ring
  • X = Standard Plain End (no gasket)
• End #2 Adapter:
  • A = Open end w/gasket
  • H = Fin
  • S = Solid End
  • X = Standard Plain End (no gasket)
• Elastomer:
  • B = Buna
  • S = Silicone
  • V = Viton

---

Disclaimer: This summary is based on the provided text extract. The original OEM PDF datasheet may contain additional figures, footnotes, or more recent revisions. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet