Datasheet summary
AG FR series
Engineering summary from PDF text extraction for AG FR series. Verify every value with the OEM datasheet.
Summary
Product identification
The AG FR Series consists of thin-film reverse osmosis (RO) elements designed for challenging water and wastewater applications. These elements feature high flux and high sodium chloride (NaCl) rejection, with an element construction that enhances feed flow to minimize fouling and optimize energy performance. They also facilitate more effective cleaning cycles, reducing cleaning frequency and the need for harsh chemicals.
The membrane type is A-Series, thin-film membrane (TFM).
| Model | Average Permeate Flow gpd (m³/day) | Average NaCl Rejection | Minimum NaCl Rejection | Membrane Area ft² (m²) | Outer Wrap | Feed Spacer (mil) | Part Number |
|---|---|---|---|---|---|---|---|
| AG4040FM FR,34 | 2,200 (8.8) | 99.5% | 99.0% | 80 (7.4) | Fiberglass | 34 | 3154063 |
| AG8040F-400 FR,34 | 11,000 (41.6) | 99.5% | 99.1% | 400 (37.2) | Fiberglass | 34 | 3136931 |
Testing Conditions for Rejection (1)(2):
- 2,000 ppm NaCl solution
- 225 psi (1,551 kPa) operating pressure
- 77°F (25°C)
- pH 7.5
- 15% recovery
- Average salt rejection after 24 hours of operation. Individual flow rate may vary ±20%.
Operating limits
- Typical Operating Pressure: 200 psi (1,379 kPa)
- Maximum Operating Pressure: 600 psi (4,137 kPa)
- Typical Operating Flux: 10-20 GFD (15-35 LMH)
- Maximum Temperature:
- Continuous operation: 122°F (50°C)
- Clean-In-Place (CIP): 122°F (50°C)
- pH Range:
- Optimum rejection: 7.0-7.5
- Continuous operation: 2.0-11.0
- Clean-In-Place (CIP): 1.0-13.0
- Maximum Pressure Drop:
- Over an element: 15 psi (103 kPa)
- Per housing: 50 psi (345 kPa)
- Chlorine Tolerance: 1,000+ ppm x hours (Dechlorination recommended)
Feed water
- NTU < 1
- SDI₁₅ < 5
Mechanical / hydraulic
- Outer Wrap: Fiberglass
- Feed Spacer: 34 mil
| Model | Type | Dimensions, inches (cm) | Boxed Weight lbs (kg) |
|---|---|---|---|
| AG4040FM FR,34 | Male | A=40.0 (101.6), B=0.75 (1.90), C=3.9 (9.9) | 11 (5) |
| AG8040F-400 FR,34 | Female | A=40.0 (101.6), B=1.125 (2.86), C=7.9 (20.1) | 35 (16) |
Disclaimer: This summary is based on the provided text extract. The original PDF may contain additional figures, footnotes, or revisions not included here. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.