Datasheet summary
AG HR series
Engineering summary from PDF text extraction for AG HR series. Verify every value with the OEM datasheet.
Summary
Product identification
The AG HR Series consists of high rejection brackish water reverse osmosis (RO) elements. These elements utilize an A-series, thin-film membrane (TFM*). They are certified to NSF/ANSI 61.
Operating limits
- Typical Operating Pressure: 200 psi (1,380 kPa)
- Typical Operating Flux: 10-20 GFD (15-35 LMH)
- Maximum Operating Pressure: 600 psi (4,137 kPa)
- Maximum Temperature:
- Continuous operation: 122°F (50°C)
- Clean-In-Place (CIP): 122°F (50°C)
- pH range:
- Optimum rejection: 7.0-7.5
- Continuous operation: 2.0 – 11.0
- Clean-In-Place (CIP): 1.0-13.0
- Maximum Pressure Drop:
- Over an element: 15 psi (103 kPa)
- Per housing: 50 psi (345 kPa)
- Chlorine Tolerance: 1,000+ ppm-hours; dechlorination is recommended.
Feed water
- Recommended for brackish water with salt concentration (TDS) levels between 1,000 and 10,000 mg/l.
- NTU < 1
- SDI₁₅ < 5
Mechanical / hydraulic
The AG HR series elements are designed for high rejection with operating pressures as low as 200 psi (1,379 kPa). They are suitable when very high salt rejection of monovalent ions is required.
Element Specifications
The elements feature an A-series, thin-film membrane (TFM*) and a Fiberglass outer wrap.
| Model | Active Area ft² (m²) | Part Number |
|---|---|---|
| AG-90 | 90 (8.4) | 3056665 |
| AG-365 | 365 (33.9) | 3056666 |
| AG-400 | 400 (37.2) | 3056667 |
| AG-400,34 | 400 (37.2) | 3056668 |
| AG-440 | 440 (40.9) | 3056669 |
Performance Specifications
(Testing conditions: 2,000 ppm NaCl solution at 225 psi (1,550 kPa) operating pressure, 77°F (25°C), pH 7 and 15% recovery. Average salt rejection after 24 hours operation. Individual flow rate may vary ±20%.)
| Model | Average Permeate Flow gpd (m³/day) | Average NaCl Rejection | Minimum NaCl Rejection |
|---|---|---|---|
| AG-90 | 2400 (9.1) | 99.8% | 99.3% |
| AG-365 | 10,000 (37.9) | 99.8% | 99.3% |
| AG-400 | 11,000 (41.6) | 99.8% | 99.3% |
| AG-400,34 | 11,000 (41.6) | 99.8% | 99.3% |
| AG-440 | 12,000 (45.4) | 99.8% | 99.3% |
Dimensions and Weights (Boxed)
| Model | Type | A inches (cm) | B inches (cm) | C inches (cm) | Weight lbs (kg) |
|---|---|---|---|---|---|
| AG-90 | Male | 40.0 (101.6) | 0.75 (1.90) | 3.9 (9.9) | 9 (4) |
| AG-365 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (16) |
| AG-400 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (16) |
| AG-400,34 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (16) |
| AG-440 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (16) |
Disclaimer: This summary is based on the provided text extract. The original PDF datasheet may contain additional figures, footnotes, or revisions not included here. For contractual purposes, always refer to the specific OEM PDF revision applicable to your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.