Datasheet summary
AG Series standard
Engineering summary from PDF text extraction for AG Series standard. Verify every value with the OEM datasheet.
Summary
Product identification
The A-Series family of proprietary thin-film reverse osmosis (RO) elements, including the AG Series, are characterized by high flux and high sodium chloride (NaCl) rejection. AG Standard Brackish Water Elements are suitable when high rejection and operating pressures as low as 200 psi (1,379 kPa) are desired. These elements allow moderate energy savings and are considered a standard in the industry.
- Membrane: A-Series, thin-film membrane (TFM)
Product water
The following specifications are based on testing conditions: 2,000 ppm NaCl solution at 225 psi (1,551 kPa) operating pressure, 77°F (25°C), pH 7.5 and 15% recovery. Average salt rejection is after 24 hours of operation. Individual flow rate may vary ±20%.
- Average NaCl Rejection: 99.5%
- Minimum NaCl Rejection: 99.0%
| Model | Average Permeate Flow gpd (m³/day) |
|---|---|
| AG2540TM | 750 (2.8) |
| AG4026F | 1,600 (6.1) |
| AG4040C | 2,400 (9.1) |
| AG4040FM | 2,400 (9.1) |
| AG4040TM | 2,400 (9.1) |
| AG8040F | 10,000 (37.9) |
| AG8040F 400 | 11,000 (41.6) |
| AG8040F 440 | 12,000 (45.4) |
Mechanical / hydraulic
| Model | Membrane Area ft² (m²) | Outer Wrap | Part Number |
|---|---|---|---|
| AG2540TM | 27 (2.5) | Tape | 1206729 |
| AG4026F | 60 (5.6) | Fiberglass | 1206756 |
| AG4040C | 90 (8.4) | Cage | 1206757 |
| AG4040FM | 85 (7.9) | Fiberglass | 3032513 |
| AG4040TM | 85 (7.9) | Tape | 3032514 |
| AG8040F | 365 (33.9) | Fiberglass | 3032515 |
| AG8040F 400 | 400 (37.2) | Fiberglass | 3032518 |
| AG8040F 440 | 440 (40.9) | Fiberglass | 3194307 |
Note: 4040C elements do not feature brine seal.
Dimensions and Weight
| Model | Type | A (inches/cm) | B (inches/cm) | C (inches/cm) | Boxed Weight lbs (kg) |
|---|---|---|---|---|---|
| AG2540* | Male | 40.0 (101.6) | 0.75 (1.90) | 2.4 (6.1) | 7 (3) |
| AG4026* | Female | 26.0 (66.7) | 0.625 (1.59) | 3.9 (9.9) | 9 (4) |
| AG4040C | Female | 40.0 (101.6) | 0.625 (1.59) | 3.9 (9.9) | 11 (5) |
| AG4040FM | Male | 40.0 (101.6) | 0.75 (1.90) | 3.9 (9.9) | 11 (5) |
| AG4040TM | Male | 40.0 (101.6) | 0.75 (1.90) | 3.9 (9.9) | 11 (5) |
| AG8040F | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (16) |
| AG8040F 400 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (16) |
| AG8040F 440 | Female | 40.0 (101.6) | 1.125 (2.86) | 7.9 (20.1) | 35 (16) |
Operating limits
Element properties and parameters are indicative numbers. Specific values by element may vary within normal element manufacturing tolerances.
- Typical Operating Pressure: 200 psi (1,379 kPa)
- Typical Operating Flux: 10-20 GFD (15-35 LMH)
- Maximum Operating Pressure:
- Tape outer wrap: 450 psi (3,103 kPa)
- Other outer wrap types: 600 psi (4,137 kPa)
- Maximum Temperature:
- Continuous operation: 122°F (50°C)
- Clean-In-Place (CIP): 122°F (50°C)
- pH Range:
- Optimum rejection: 7.0-7.5
- Continuous operation: 2.0-11.0
- Clean-In-Place (CIP): 1.0-13.0
- Maximum Pressure Drop:
- Tape outer wrap: 7 psi (48 kPa) over an element, 25 psi (172 kPa) over the vessel
- Cage and FRP outer wrap: 15 psi (103 kPa) over the element, 60 psi (413 kPa) over the vessel
- Chlorine Tolerance: 1,000+ ppm x hours (dechlorination recommended)
Feed water
- NTU < 1
- SDI₁₅ < 5
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions present in the official OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.