Ionsoft maxi

Summary

Product identification

The IONSOFT™ Maxi is a cost-efficient softener range utilizing ion exchange resin technology for industrial applications. It is designed with upflow counter-current regeneration to optimize operational expenditure (OPEX).

Key features include:

• 5 vessel sizes.
• Up to 4 units can operate in parallel.
• Up to 2 units can be configured for Duty/Stand-by operation.
• User-friendly controller with LCD display integrated in the control valve.
• Regeneration can be triggered manually or automatically.
• Automatic regeneration is based on volume and time.
• Optimized usage of regeneration salt through upflow counter-current regeneration and proportional regeneration when resins are only partially exhausted.
• Possibility for duty/stand-by configuration with 2 vessels.
• Up to 4 units running in parallel for continuous production.

Applications

• Glass washing
• Cleaning and rinse water
• Laundry
• Reverse Osmosis feed water pre-treatment (e.g., before Sirion)
• Cooling towers

Operating limits

• Minimum water temperature: 5 °C
• Maximum water temperature: 25 °C
• Minimum supply pressure: 2.5 barg
• Maximum supply pressure: 6 barg
• Minimum ambient temperature: 5 °C
• Maximum ambient temperature: 35 °C
• Environmental conditions: Indoor installation in a non-corrosive atmosphere.
• General flow rates: from 1 to 56 m³/h

Feed water

Feed water must have a quality equivalent to potable water, colorless, free from organic contamination, chlorine, iron, manganese, and suspended solids. Raw water shall not contain hardness stabilizing agents and must not be over-saturated with gas.

• Max inlet Total Chlorine: 0.10 mg/l
• Max inlet Iron (Fe³⁺): 0.05 mg/l
• Max inlet Manganese (Mn²⁺): 0.05 mg/l

Product water

• Treated Water Hardness: < 1 mg/l as CaCO₃

Electrical

• Voltage: AC 100-240V / DC 15V
• Frequency: 50/60 Hz
• Phases: 1

Mechanical / Hydraulic

The IONSOFT™ Maxi product line offers various models with specific Min Feed Flowrate, Nominal Feed Flowrate, Nominal Capacity (in kg CaCO₃), Output per Regeneration (in m³), and Salt Usage per Regeneration (in kg). Output and Salt Usage per Regeneration are based on a standard hardness of 100 mg/l as CaCO₃ per vessel. See the official PDF for exact tabulated values per model.

System dimensions (Total Installed Length, Width, and Height in meters) vary by model. See the official PDF for exact tabulated values per model.

Pipes connections (Feed, Outlet, Drain) also vary by model and are specified in DN (Rp or R BSPT). See the official PDF for exact tabulated values per model.

Materials of Construction

• Pressure Vessels: Fiberglass
• Pipework: Polypropylene

Associated Services

Veolia Water Technologies offers local after-sales service and support teams for preventative and corrective maintenance programs. For optimized operation, Hydrex™ 7110 water treatment chemicals and salt pellets from Veolia Water Technologies should be used.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet