OSMO BEV UF series

Summary

Product identification

The OSMO BEV UF membrane element is engineered for beverage plants, providing high-quality water for the production of carbonated soft drinks, juices, and sport drinks. It functions as an absolute barrier to Cryptosporidium and Giardia, and rejects color and organics (naturally occurring tannins, humics, fulvics).

• Membrane Type: P-Series, Polyethersulfone
• Nominal MWCO: 6,000 Da
• Design: Full-Fit* design eliminates stagnant zones associated with industrial fiberglass wrapped elements, creating a self-cleaning effect and offering less pressure resistance.
• Quality Assurance: 100% Wet Test
• Certification: Certified to NSF/ANSI 61
• Model: OSMO-BEV-UF-FF
• Part Number: 1233034

Mechanical / Hydraulic

• Active Area: 350 ft² (32.5 m²)
• Outer Wrap: Full-Fit
• Element Dimensions (Model OSMO-BEV-UF-FF):
  • A: 40.0 inches (101.6 cm)
  • B: 1.125 inches (2.86 cm)
  • C: 7.9 inches (20.1 cm)
• Boxed Weight (Model OSMO-BEV-UF-FF): 35 lbs (16 kg)

Operating limits

• Typical Operating Pressure: 30-60 psi (207-414 kPa)
• Typical Operating Flux: 10-20 GFD (15-35 LMH)
• Maximum Operating Pressure: 450 psi (3,102 kPa)
• Maximum Temperature:
  • Continuous operation: 122°F (50°C)
  • Clean-In-Place (CIP): 122°F (50°C)
• Minimum Crossflow: 30 gpm (6.8 m³/hr)
• pH Range:
  • Continuous operation: 4.0-11.0
  • Clean-In-Place (CIP): 1.0-13.0 (Refer to Cleaning Guidelines Technical Bulletin TB1194.)
• Maximum Pressure Drop:
  • Over an element: 12 psi (83 kPa)
  • Per housing: 50 psi (345 kPa)
• Chlorine Tolerance: 5,000 ppm days
• Recommended Single Element Recovery: < 15%

Feed water

• NTU: < 1
• SDI: < 5

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions present in the official PDF datasheet. For contractual purposes, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet