Datasheet summary
ULP2010 100
Engineering summary from PDF text extraction for ULP2010 100. Verify every value with the OEM datasheet.
Summary
Product identification
ULP2010-100 Ultra Low Pressure Membrane Elements - ULP Series
Application
The ULP2010-100 RO element is designed for the treatment of low-salinity water resources such as tap water, well water, and centralized water supply. It is applicable to water purifying devices for:
- Residential use
- Hospital and laboratory water purification devices
- Underground water sources
Product Performance
| Model | Permeate Flow GPD(m³/d) | Rejection Rate (%) | Min. Rejection (%) |
|---|---|---|---|
| UL2010-100 | 100(0.38) | 98 | 96 |
Testing Conditions:
- Testing Pressure: 60 psi (0.41 MPa)
- Temperature of Testing Solution: 25 ℃
- Concentration of Testing Solution (NaCl): 250 ppm
- pH of Testing Solution: 6.5~8.5
- Recovery of Single Element: 15 %
Note:
- Each membrane element may have ±15% variation of permeate flow.
- Rejection Rate may vary by ±2%.
- Product performance may vary under different conditions.
Operating Guidelines
- Preservation: Dry membrane elements have no preservation solution upon leaving the factory. Wet membrane elements use 1.0% sodium bisulfite as preservation solution; in winter, 10% propylene glycol antifreeze is added. Both are vacuum packaged.
- Storage: Dry membrane elements must be kept wet after initial soaking. Wet membrane elements, if unused for a long time, require a preservation solution.
- Initial Flush: When used for the first time, flush for 15-25 minutes at low pressure (do not soak overnight), then flush for 60-90 minutes at high pressure (water flow not less than 50% of system design flow).
- Initial Discharge: The permeate and concentrated water produced during the first hour of operation must be discharged.
- Warranty: The operating limits and guidelines provided are part of the limitations for the three-year membrane element warranty.
- Chemicals: The addition of any chemicals that may affect the membrane element during storage and operation is prohibited.
- Manual: Refer to the Product Manual for detailed information on installation, commissioning, storage, and transportation.
Mechanical / Hydraulic
Product Size (mm):
- A: 256
- B: 47.5
- C: 17
- D1: 18
- D2: 20
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the OEM PDF datasheet. Contractual data for projects must match the specific OEM PDF revision used.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.