VUF 2880

Summary

Product Identification

• Model: VUF-2880
• Series: VUF Series
• Type: Hollow Fiber UF Membrane Element
• Product Size: 1.0 inch (25.4 mm)
• Active Membrane Area: 75 m²
• System Flux: 30-120 LMH (L/h)
• MWCO: 150000 Da
• Membrane Material: PVDF
• Sealant: Epoxy Resins

Operating Limits

• Maximum Operating Pressure: 0.60 MPa
• Maximum Backwash Transmembrane Pressure (TMP): 0.25 MPa
• Maximum Filtration Transmembrane Pressure (TMP): 0.20 MPa
• Maximum Temperature: 45℃
• Allowed pH Range for Feedwater in Operation: 2-11

Feed Water

Hollow fiber UF membrane elements are primarily used for removing suspended solids, colloids, and bacteria from water solutions. The allowed pH range for operation is 2-11.

Applications

• Tap water purification
• Seawater desalination pre-treatment
• Wastewater reuse purification

Important Operational Information

• Regular maintenance of ultrafiltration membrane equipment, pumps, valves, and meters is crucial.
• Conduct regular inspections for abnormalities; monitor chemical tank levels and replenish as needed.
• Record parameters such as ultrafiltration membrane inlet pressure, concentrated water pressure, produced water pressure, produced water flow, and turbidity.
• Always keep the ultrafiltration membrane in a wet state; dehydration and drying will cause irreversible damage.
• Electrical operations must be performed by trained and certified personnel.
• On-site operations require appropriate working clothes and protective equipment for safety.
• In case of system failure, check the cause promptly. For minor faults like system leakage, perform overhaul in time. For emergency failures, contact the original manufacturer.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet