G Wound

Summary

Product identification

G-Series Wound Depth Filter cartridges are available in a variety of lengths and micron ratings.

• Available lengths: 9.75 to 50 inches
• Micron ratings: 0.5 to 400 µ
• Filtration media: FDA polypropylene, bleached cotton, FDA bleached cotton, natural cotton, polyester, nylon, and glass
• Core materials: Polypropylene, 304 & 316 stainless steel, tin, and glass
• Performance-enhancing end-configurations are available to fit various process requirements.

Construction Materials

• Filtration Media:
  • FDA Polypropylene
  • Bleached Cotton
  • FDA Bleached Cotton
  • Natural Cotton
  • Polyester
  • Nylon
  • Glass
• End Caps: Polypropylene
• Core:
  • Polypropylene
  • 304 Stainless Steel
  • 316 Stainless Steel
  • Tin
  • Glass
• O-Rings/Gaskets:
  • Buna
  • EPDM
  • Silicone
  • Teflon®
  • Viton®

Dimensions (Nominal)

• Length: 9.75 to 50 inches (24.8 to 127 cm)
• Outside Diameter: 2.5 inches (6.4 cm) or 4.5 inches (11.4 cm)
• Inside Diameter: 1.06 inches (2.69 cm)

Operating limits

• Change Out ΔP (recommended): 35 PSID
• Temperature (max): Dependent on materials of construction
• Differential Pressure (max): 50 PSID (3.4 bar) at 68˚F (20˚C)

Typical Applications

• Chemicals
• Pharmaceutical
• Consumer Products
• Photographic
• Food and Beverage
• Plating Solutions
• Lubricating Oils
• Edible Oils
• Paints
• Water
• Inks
• Waste Treatment
• Petrochemicals

Ordering Information

The filter cartridges are ordered using a code structure: G [Media] [Rating (µ)] [Diameter] [Length] [Core] [End Cap Style] [O-Rings]

• Media:
  • P = FDA Polypropylene
  • C = Bleached Cotton
  • CC = FDA Bleached Cotton
  • CN = Natural Cotton
  • PE = Polyester
  • N = Nylon
  • G = Glass
• Rating (µ): 0.5, 1, 3, 5, 10, 20, 25, 30, 50, 75, 100, 200, 250, 400
• Diameter:
  • A = 2.5
  • BB = 4.5
• Length:
  • 9.75” (24.76cm)
  • 9.875” (25.08 cm)
  • 10” (25.4 cm)
  • 19.5” (49.53 cm)
  • 20” (50.8 cm)
  • 29.25” (74.26 cm)
  • 30” (76.2 cm)
  • 39” (99.1 cm)
  • 40” (101.6 cm)
  • 50” (127 cm)
• Core:
  • P = Polypro
  • A = 304 SS
  • S = 316 SS
  • T = Tin
  • FG = Glass
• End Cap Style:
  • 2P = DOE Flat Polyfoam Gasket
  • 3 = 222 w/Fin
  • 4 = 222 w/Flat Cap
  • 5 = 222 w/Spring
  • 6 = 226 w/Flat Cap
  • 7 = 226 w/Fin
  • 8 = 226 w/Spring
  • 9 = SOE w/ Spring
  • 10 = DOE w/PP Core Extender
  • 10K = DOE w/ Crimped Ext. Core
  • 10X = DOE w/ SS Core Extender
• O-Rings:
  • B = Buna
  • E = EPDM
  • S = Silicone
  • T = Teflon®
  • V = Viton®

---

Disclaimer: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required. This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror