GGHNY

Summary

Product Identification

GGHNY-Series High Purity General Grade Nylon and Plus+ Nylon Filter Cartridges feature a Nylon 6,6 membrane, designed for excellent particulate retention and cleanliness in general use applications. The optional positive zeta potential surface charge (Plus+) enhances retention performance for particulates smaller than the stated micron rating. Cartridges are manufactured in a clean-room environment.

Typical Applications

• Drinking Water
• Wine
• Soft Drinks
• Pharmaceutical
• Fermentation
• Endotoxin Removal

Dimensions

• Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
• Outside Diameter: 2.70 inches (7.0 cm) nominal

Operating Limits

• Change Out ΔP (recommended): 35 PSID
• Temperature (max): 176˚F (80˚C)
• Differential Pressure (max): 50 PSID (3.4 bar) at 68˚F (20˚C)

Construction Materials

• Membrane: Nylon 6,6
• Support Media: Polypropylene
• End Caps: Polypropylene
• Center Core: Polypropylene
• Outer Support Cage: Polypropylene
• O-Rings/Gaskets: Buna, EPDM, Silicone, Teflon® Encapsulated Viton®, Viton®, Teflon® Encapsulated Silicone

Food Safety & Toxicity

• All polypropylene components meet the specifications for biological safety per USP Class VI – 121˚C for plastics.
• Materials of construction comply with FDA regulations for food and beverage contact use as detailed in 21CFR.
• Materials used for filter media and hardware are deemed safe for use in contact with foodstuffs in accordance with EU Directives 2002/72/EC, 1935/2004, and/or 10/2011.

Sanitization/Sterilization

• Filtered Hot Water: 80˚C for 30 min.
• Steam Sterilization: 121˚C for 30 min., multiple cycles
• Chemicals: Cartridges are compatible with most chemical sanitizing agents.
• Note: A stainless steel insert option is required for all cartridges being hot water sanitized or steam sterilized.

Ordering Information

The GGHNY-Series cartridges can be ordered with various options:

• Micron Ratings (µ): 0.03, 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2
• Length Options: 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm)
• End Cap Styles: DOE Flat Gasket, 222 w/ Fin, 222 w/ Flat Cap, 226 w/ Flat Cap, 226 w/ Fin, 213 Internal O-Ring, 222 3-tabs w/ Fin
• O-Ring/Gasket Materials: Buna, EPDM, Silicone, Teflon® Encapsulated Viton®, Viton®, Teflon® Encapsulated Silicone
• Adders: 316SS Compression Spring, Stainless Steel Insert

Flow Rate vs Pressure Drop

Data not provided in the extracted text. See the official PDF for graphs or tabulated values.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror