AQUACHAIN
Feedback & Contact
Back to Harmsco Filtration
Harmsco logo

Datasheet summary

Harmsco Polyester Cartridges Filters

Engineering summary from PDF text extraction for Harmsco Polyester Cartridges Filters. Verify every value with the OEM datasheet.

Summary

Product identification

HARMSCO® Premium Polyester Series Cartridges are highly efficient filter cartridges made of pleated Polyester-Plus™ filter media, featuring the industry’s largest surface area. They are designed for high efficiency and low pressure drops.

Features:

  • Lower overall operating cost
  • Longer filter runs for fewer change outs
  • Lower initial pressure drops
  • Reduced maintenance down time and cost
  • Increased contaminant removal
  • High flow capability
  • Pleated design for more surface area
  • FDA approved materials (excluding High Temp)
  • NSF 61 certified (excluding High Temp)
  • Engineered media for superior performance
  • Cleanable and reusable in most applications and micron sizes
  • Thermally bonded end caps to ensure better sealing
  • High Temperature cartridges available (not NSF 61 Listed)
  • Color coded end caps for easy micron identification
  • Full product line - largest selection of micron ratings
  • Industrial Grade

Applications

  • Industrial Water Filtration
  • Industrial Coolant Filtration
  • Cooling Tower Filtration
  • Chill Water Loop Filtration
  • Food & Beverage Filtration
  • Marine / Aquatic Filtration
  • Commercial/Residential Drinking Water Filtration
  • Municipal Drinking Water Filtration
  • Reverse Osmosis Pre-filtration
  • Desalination Pre-filtration

Materials of Construction

  • Filter media: Polyester-Plus™
  • End caps: Plastisol (pliable PVC)
  • Center tubes: Molded ABS or rigid PVC

Operating limits

  • Temperature:
    • Standard cartridges: 140˚F
    • High temp. cartridges: 200˚F (93˚C)
  • pH: 3 to 11
  • Flow rate: 4-6 GPM per 9-3/4” length (Recommended flow rates in table are scaled multiples of 6 GPM per 9-3/4" length.)
  • Dimensions: 2-3/4” O.D.; 1-1/16” I.D.

Product Codes (Standard Polyester-Plus™)

These cartridges feature Polyester-Plus™ engineered media for high efficiency and low pressure drops. The surface area is approximately 6 sq.ft. per 9-3/4" length. Recommended flow rate is approximately 6 GPM per 9-3/4" length.

  • 801-0.35: 0.35 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-1: 1 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-5: 5 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-10: 10 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-20: 20 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-50: 50 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-100: 100 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 921-0.35: 0.35 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 19-1/2 in Length, 2-3/4 in O.D., 24 No./Case
  • 921-1: 1 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 19-1/2 in Length, 2-3/4 in O.D., 24 No./Case
  • 921-5: 5 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 19-1/2 in Length, 2-3/4 in O.D., 24 No./Case
  • 921-10: 10 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 19-1/2 in Length, 2-3/4 in O.D., 24 No./Case
  • 921-20: 20 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 19-1/2 in Length, 2-3/4 in O.D., 24 No./Case
  • 921-50: 50 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 19-1/2 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-0.35/20*: 0.35 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 20 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-1/20: 1 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 20 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-5/20*: 5 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 20 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-20/20*: 20 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 20 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-50/20: 50 Nominal Micron Rating, 12 sq ft Media, 12 GPM Recommended Flow Rate, 20 in Length, 2-3/4 in O.D., 24 No./Case
  • 931-0.35: 0.35 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 29-1/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 931-1: 1 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 29-1/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 931-5: 5 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 29-1/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 931-10: 10 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 29-1/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 931-20: 20 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 29-1/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 931-50: 50 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 29-1/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-0.35/30*: 0.35 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 30 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-1/30: 1 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 30 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-5/30*: 5 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 30 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-20/30*: 20 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 30 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-50/30: 50 Nominal Micron Rating, 18 sq ft Media, 18 GPM Recommended Flow Rate, 30 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-0.35/40*: 0.35 Nominal Micron Rating, 24 sq ft Media, 24 GPM Recommended Flow Rate, 40 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-1/40: 1 Nominal Micron Rating, 24 sq ft Media, 24 GPM Recommended Flow Rate, 40 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-5/40*: 5 Nominal Micron Rating, 24 sq ft Media, 24 GPM Recommended Flow Rate, 40 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-20/40*: 20 Nominal Micron Rating, 24 sq ft Media, 24 GPM Recommended Flow Rate, 40 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-50/40: 50 Nominal Micron Rating, 24 sq ft Media, 24 GPM Recommended Flow Rate, 40 in Length, 2-3/4 in O.D., 24 No./Case

* Add suffix “W” if wrapped (ex. “801-0.35/20W”)

Product Codes (High Temperature Polyester)

These cartridges are rated up to 200°F (93°C) but are not NSF 61 Listed.

  • 801-1-HT: 1 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-5-HT: 5 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-20-HT: 20 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case
  • 801-50-HT: 50 Nominal Micron Rating, 6 sq ft Media, 6 GPM Recommended Flow Rate, 9-3/4 in Length, 2-3/4 in O.D., 24 No./Case

Micron Identification

End caps are color-coded for easy micron identification:

  • 0.35 Nominal Micron: Brown
  • 1 Nominal Micron: Tan
  • 5 Nominal Micron: White
  • 10 Nominal Micron: Red
  • 20 Nominal Micron: Blue
  • 50 Nominal Micron: Yellow
  • 100 Nominal Micron: Green

Compatibility

Designed for use with HARMSCO® HIF, BC, HMC and FSSS Filter Housings. HARMSCO® HIF filter housings use 9-3/4”, 19-1/2” and 29-1/4” length cartridges only.

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or revisions present in the full OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror

Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.