BPONG Filter Bags

Summary

Product identification

The FSI X100 Convertible Filter Housing is designed as a low-cost alternative for various industrial applications. It is made from polypropylene with a UV inhibitor for durability and chemical resistance. The housing is convertible, designed to accept either a filter bag or a filter cartridge.

Available models include:

• X100B Plastic Bag Vessel (includes Housing, Lid, Basket, Lid Gasket (BUNA))
• X100C Plastic Cartridge Vessel (includes Housing, Lid, Cartridge Plate, Lid Gasket & Plate Gasket (BUNA))

Operating limits

• Pressure Rating: 100 PSIG @ 110 °F Water Service
• Temperature: Operating range up to 110 °F
• Flow Rate (suggested maximum): 45-50 GPM (with filter elements installed; actual maximum flow rate without filters is not specified but will be higher)

The PDF includes a chart showing the relationship between operating temperature and pressure, with the X100 operating range covering up to 100 PSI and 110 °F.

Mechanical / hydraulic

• Construction Material: Polypropylene with a UV inhibitor
• Design Features:
  • "Clean wall" design for easy cleaning or in-place flushing.
  • Top-loaded design with a threaded lid for tool-free filter element changes.
  • Positive sealing for both bag and cartridge filters, eliminating fluid bypass.
  • Converts between bag and cartridge operation by ordering the X100 Plastic Basket (for bags) or the Cartridge Plate and Plate Gasket (for cartridges).
• Approximate Weight: 10 lbs.
• Port Size: 2” NPT or 2” BSP Threads available.
• Lid Vent: 1/4” NPT.
• Dimensions (approximate, based on diagram):
  • Overall Height: 26.6" (67.56 cm)
  • Housing Height: 23.5" (59.69 cm)
  • Width: 8.3" (21.08 cm)
  • Mounting Hole Diameter: 7/8" (2.22 cm)
  • Other specific component dimensions are detailed in the diagram within the PDF.

Compatible Filter Elements

The X100 housing is designed for both bag and cartridge filtration, using FSI's specific filter types for optimal performance.

X01 Filter Bag

• Dimensions: 6" diameter x 20" length
• Surface Area: 2 square feet (0.186 square meters), equivalent to a standard #1 size bag.
• Seal: Patented Polyloc® Ring for direct sealing against the housing wall.
• Support: Heavy-duty Polypropylene Restrainer Basket.
• Available Types:
  • BPONG [ ] X01: 1, 5, 10, 25, 50, 100 micron (Polypropylene)
  • BPMO [ ] X01: 100, 150, 200, 300, 600, 800 micron (Polypropylene)
  • BPOMF [ ] X01: 1, 2, 10, 25, 90, * micron (Polypropylene)
    • (*BPOMFOAX01 is a special purpose bag with a 25 micron rating.) The PDF includes a clear water pressure drop graph for FSI BPONG X01 Bags.

X20 Filter Cartridge

• Type: Steep pore gradient, depth filter.
• Dimensions: 5.5" diameter x 23.25" length.
• Total Volume: 500 cubic inches.
• Capacity: Outperforms standard 10" cartridges by holding 20 times the volume of dirt (in laboratory tests).
• Design: Single open end, built-in handle, patented Polyseal End Fitting for bypass-free sealing without O-rings or flat gaskets.
• Available Types:
  • CMMF [ ] X20: 1, 5, 10, 25, 50, 75, 100 micron (Polypropylene, Polyseal**)
    • (**Polyseal provides a socket-fit positive seal in a single open-end cartridge design.) The PDF includes a clear water pressure drop graph for FSI X20 Cartridges.

Accessories

• X100 Plastic Leg Stands: Lightweight molded plastic assemblies for economical vessel support.
• X100 Metal Leg Stands: Tripod leg stands available in carbon steel or 304 stainless steel for heavy-duty support.
• X100 Cone Base Stand: Made of 100% polypropylene, with options for a 2" NPT elbow or T-pipe fixture.
• DPGX100 Series Differential Pressure Gauge:
  • Indicates filter element change-out time (green for clean, red for dirty).
  • Available in two pressure ranges: 6-8 PSID or 15-20 PSID.
  • Wetted materials: Glass-filled nylon/stainless steel.
  • Seal: Viton Seal/Teflon-coated spring.
• X100 Wall Mounting Brackets: Sturdy construction, available in carbon steel or stainless steel.

Options & Replacement Parts

• Replacement Lid - No Gasket (Part No. 36028PTBU 1/4 NPT)
• X100 Plastic Basket (Part No. 36002)
• Cartridge Plate (Part No. R36005PPBU)
• (2) Plastic Leg and Foot Assembly (Part No. 36017)
• Carbon Steel Tripod Legs (Part No. 281276A)
• 304 Stainless Steel Tripod (Part No. 281276B)
• Lid Gasket (BUNA) (Part No. EGT 30096B)
• Lid Gasket (Viton ®) (Part No. EGT 30096VI)
• Plate Gasket (BUNA) (Part No. EGR 134X4VI)
• Plate Gasket (Viton ®) (Part No. EGR 134X4VI)

Compliance

• FDA approved
• CE mark

---

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions. For contractual data, please refer to the official OEM PDF document revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror