Pall Advanta housings

Summary

Product identification

Pall Advanta® Liquid Filter Housings are advanced filter housings designed for sanitary applications, manufactured from 316L stainless steel. They are engineered for the Pharmaceutical, Biotechnology, Cosmetics, and Food and Beverage industries.

Features and Benefits:

• Aseptic design
  • Crevice-free electropolished surfaces (internal Ra value < 0.4 µm / 15 µin)
  • Fully self draining
  • No dead legs
• Low hold-up volumes for maximum product recovery
• Quick fit ‘Staubli’-type connections for easy filter integrity testing
• Easy to use ‘low point’ sanitary drain valve
• Range of options to aid use in automated production systems
• CE marking shows design review to European Pressure Directive 97/9/EC
• Every housing supplied with a quality certificate and manufactured to ATEX Directive 94/9/EC (Group II Category 2)
• Variety of connection styles, vents and drains offer choice and convenience
• Filter cartridge accepts single-open-ended Pall code 7 and code 2 "AB" style 127mm (5"), 254mm (10"), 508mm (20") and 762mm (30") height filter cartridges

Operating limits

• Maximum Operating Pressure: -1 to 10 bar g / -14.5* to 150** psi g (*Full Vacuum, **With compatible fluids, which do not soften, swell or adversely affect the materials)
• Maximum Operating Temperature: 150°C (300°F)
• Steam Sterilizable: up to 150°C (300°F)

Mechanical / hydraulic

Materials of Construction:

• Wetted parts: AISI 316L stainless steel
• Clamp: AISI Nitronic 60
• O-ring: Silicone - FDA listed
• Gasket Material: Silicone elastomer (other materials available upon request)

Surface finish:

• All electropolished
• Internal: Ra < 0.4 µm / < 15 µ inch (typical)
• External: Ra < 0.8 µm / < 32 µ inch (typical)

Dimensions: Dimensions A (Face to face), B (Overall height), and C (Clearance) are provided for common housing variants. See the official PDF for exact tabulated values.

Typical Water Flow vs Differential Pressure: The document includes a graph showing typical water flow versus differential pressure. These characteristics refer to the empty housing only for water at 20°C (68°F). For other liquids, multiply pressure drop by relative density. To obtain the total pressure drop of a complete filter assembly, the cartridge pressure drop must be added.

Inlet/Outlet Connection Codes:

• G23: 1" 'Tri-Clamp' compatible to ISO 2852
• GNW25: Dairy fitting NW 25 to DIN 11851
• GA25: Aseptic thread connection NW 25 to DIN 11864-1
• G94: Butt weld 33.7 x 2.0 mm to ISO 1127

Drain Options:

• B: Sanitary valve with hosebarb
• D: 1⁄2" Tri-Clamp connection to ISO 2852
• N: No drain

Vent Options:

• A: Sanitary valve fitting for 'Staübli' type couplings
• C: 11⁄2" Tri-Clamp connection to ISO 2852 with side sanitary valve with quick release fitting for Stäubli type couplings
• D: 1⁄2" Tri-Clamp to ISO 2852
• E: Butt weld 13.5 x 1.6 mm to ISO 1127

Compliance / Certifications

• CE marking shows design review to European Pressure Directive 97/9/EC
• Manufactured to ATEX Directive 94/9/EC (Group II Category 2)
• Inspection documentation: Test report type 2.3 to EN10204
• Conformance to EC PED

Accessories and Spares

• ACS0598CM: Diaphragm valve for 1⁄2" Tri-Clamp compatible connection (includes clamp and gasket)
• ACS0457FA: Pressure gauge kit -1 to 10 bar g for 11⁄2" Tri-Clamp connection to ISO 2852 (includes clamp and gasket)
• ORH4P-238: Silicone housing closure gasket
• ACS0602EM: Silicone housing valve gasket kit
• ACS0632HA: Housing stand Further spares and accessories available upon request.

---

Disclaimer: This summary is based solely on the provided text extract. The original PDF may contain additional figures, footnotes, or revisions not captured here. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror