Profile UP Filters

Summary

Product Identification

Pall Profile® UP Filters are 63.5 mm (2.5 in) diameter pleated polypropylene cartridges. These absolute-rated filters combine Pall's Ultipleat® technology with Profile depth filter media, featuring a proprietary construction with continuously varying fiber diameter to create a tapered pore medium and a crescent-shaped pleat structure.

Key characteristics:

• Filter Type: Absolute-rated pleated depth filter.
• Material: Polypropylene for wide chemical compatibility, allowing for cartridge incineration. P and W options are constructed entirely of FDA-listed materials.
• Design:
  • Thicker than conventional pleated filters.
  • Optimized for gel removal and sharp, distinct particle removal.
  • Low pressure drop: up to one-fifteenth that of conventional depth filters and half that of higher area pleated filters with the same removal ratings.
  • Exceptional service life.
• Application: Ideal for viscous fluids, dispersions, and applications requiring long service life.
• Rating Method: Absolute rating based on the modified Oklahoma State University (OSU) F-2 Filter Performance (Beta Rating) Test.

Operating Limits

Maximum Differential Pressure vs. Temperature

(Based on polypropylene core collapse)

• 4.1 bard (60 psid) at 30˚C (86˚F)
• 3.4 bard (50 psid) at 50˚C (122˚F)
• 2 bard (30 psid) at 70˚C (158˚F)
• 1 bard (15 psid) at 80˚C (176˚F)

Kleen-Change® 700 Assembly

• Maximum operating pressure: 5.2 bard (75 psid) at 38˚C (100˚F)

Product Water

Liquid Service Removal Rating

(At 99.98% Efficiency, unless otherwise noted)

• Grade 020: 3.2 µm (or <1.0 µm at 90%)
• Grade 045: 4.5 µm (or 1.2 µm at 90%)
• Grade 060: 6.0 µm (or 2.5 µm at 90%)
• Grade 100: 10.0 µm (or 4.3 µm at 90%)
• Grade 200: 20.0 µm (or 11.0 µm at 90%)
• Grade 300: 30.0 µm (or 17.0 µm at 90%)
• Grade 400: 40.0 µm (or 19.0 µm at 90%)
• Grade 500: 50.0 µm (or 25.0 µm at 90%)
• Grade 700: 35.0 µm at 90% (precision evaluation of 99.98% not possible)
• Grade 1000: 60.0 µm at 90% (precision evaluation of 99.98% not possible)

Mechanical / Hydraulic

Dimensions

• Diameter: 63.5 mm (2.5 in)
• Lengths: 254 mm (10 in), 508 mm (20 in), 762 mm (30 in), 1016 mm (40 in)

Configurations

• PUY Series: Double open ended, continuous lengths, elastomeric gaskets on end caps, fits housings for 2.5 or 2.75 inch outer diameter filters.
• AB Code 18 Series: Single open ended, continuous lengths, single 222 size O-ring, flat top end.
• AB Code 3 Series: Single open ended, continuous lengths, 222 size O-ring, notched top end.
• AB Code 7 Series: Single open ended, continuous lengths, 226 size O-ring, finned top end, locking tabs on bottom.
• AB Code 8 Series: Single open ended, continuous lengths, 222 size O-ring, finned top end.
• Kleen-Change® 700 Assembly: Completely disposable polypropylene capsule.
  • Holds seven 10 inch or 20 inch filters.
  • Supplied with 1 inch Tri-Clamp* inlet and outlet connections, internally threaded with 3/4 inch FNPT.

O-Ring Options

• H4: Silicone (standard for AB Code 3, 7, 8)
• H: Fluorocarbon elastomer
• J: Ethylene propylene
• H13: Nitrite (standard for AB Code 18)

Gasket Options

• J: Ethylene propylene (standard)
• H13: Nitrite
• H4: Silicone
• H: Fluorocarbon elastomer
• Y1: Polypropylene

Clean Pressure Drop

(Aqueous Service, per 10 inch element)

• Grade 020: 2.37 MBARD / 0.13 LPM (PSID / GPM)
• Grade 045: 1.55 MBARD / 0.085 LPM (PSID / GPM)
• Grade 060: 0.64 MBARD / 0.035 LPM (PSID / GPM)
• Grade 100: 0.55 MBARD / 0.030 LPM (PSID / GPM)
• Grade 200: 0.46 MBARD / 0.025 LPM (PSID / GPM)
• Grade 300: 0.36 MBARD / 0.020 LPM (PSID / GPM)
• Grade 400: 0.27 MBARD / 0.015 LPM (PSID / GPM)
• Grade 500: <0.18 MBARD / 0.010 LPM (PSID / GPM)
• Grade 700: <0.18 MBARD / 0.010 LPM (PSID / GPM)
• Grade 1000: <0.18 MBARD / 0.010 LPM (PSID / GPM)
• Note: For fluids other than water, multiply the value calculated by the fluid's viscosity measured in centipoise.

Compatible Housings

Housings are available in polypropylene, PVC, CPVC, PVDF, carbon steel, or stainless steel. They can accommodate 1-152, 10 inch modules per housing (one 40 inch filter represents four 10 inch modules).

---

Disclaimer: This summary is based on the provided text extract and may miss figures, footnotes, or revisions present in the complete OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror