Datasheet summary
Marksman PFT Filter Elements
Engineering summary from PDF text extraction for Marksman PFT Filter Elements. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Line: Marksman™ PFT Series Filter Elements
- Type: High Capacity Pleated Polypropylene Filter Elements
- Key Features:
- New, larger cartridge geometry
- High flow capacity
- Poly-Fine® II proprietary media for highly consistent filtration
- Inside-out flow traps contaminant inside the element
- Unique sealing device adjusts to fit in most bag filter housings
- High surface area for long service life
- All polypropylene construction
- Wide chemical compatibility
- Short length option to accommodate shorter baskets
- Materials of construction:
- Filter media: Polypropylene
- Hardware: Polypropylene
- Support material: Polypropylene
- Gaskets: EPDM, fluorocarbon elastomer, nitrile
- Sealing: Thermal bond
- Purity: Cartridges do not use surfactants, binders, and adhesives.
Operating limits
- Maximum operating differential pressure:
- 5.2 bard @ 20°C (75 psid @ 68°F)
- 2.4 bard @ 74°C (35 psid @ 165°F)
- Note: Stainless steel flange recommended for temperatures in excess of 43°C (110°F).
- Recommended change-out differential pressure: 2.4 bard @ up to 54°C (35 psid @ up to 130°F)
Product water
- Filter grades: 1, 3, 5, 10, 20, 40, 70, 90, 150 µm
- Particle Removal Ratings:
- 90% Efficiency:
- PFTM 1: 1 µm
- PFTM 3: 2 µm
- PFTM 40: 20 µm
- PFTM 90: 57 µm
- ≥99.9% Efficiency:
- PFTM 5: 5 µm
- PFTM 10: 9 µm
- PFTM 20: 15 µm
- PFTM 70: 70 µm
- PFTM 150: 145 µm
- 90% Efficiency:
Mechanical / hydraulic
- Dimensions (nominal):
- Outside filter diameter: 15.2 cm (6 in)
- Lengths:
- Size 1: Standard, Short
- Size 2: Standard, Short, Extra Short
- Size 4: 101.6 cm (40 in)
- Outside flange diameter: Three diameters are available; contact Pall for information on sizes.
- Housing Compatibility:
- Available to fit most Size 1 and Size 2 bag housings with no hardware changes.
- Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Marksman housings.
- Typical Flow (Water @ 20°C / 68°F): See the official PDF for exact tabulated values, which vary significantly by filter grade and cartridge length/size.
Disclaimer This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions found in the complete OEM PDF. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.