Micro Carbon II SCC Filter Cartridges

Summary

Product identification

The SCC MICRO-CARBON® II Series Filter Cartridges are powder activated carbon cartridges designed to reduce sediment, tastes, odors, and chlorine. They serve as excellent polishing filters for process or closed-loop streams.

Operating limits

• Maximum Operating Temperature: 125°F (52°C)
• End Configuration: DOE

Materials of Construction

1 µm Cartridges

• Filter Media: Powder Activated Carbon Impregnated Cellulose
• End Caps: Polypropylene
• Netting: Polyethylene
• Inner/Outer Wraps: Polyester Reinforcement Backing/Polyethylene Outer Netting
• Gaskets: Buna N

5 µm Cartridges

• Filter Media: Powder Activated Carbon Impregnated Cellulose
• End Caps: Vinyl Plastisol
• Netting: Polyethylene
• Inner/Outer Wraps: Cellulose Polyester Reinforcement Backing/Polyethylene Outer Netting

All polymeric materials are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

Mechanical / hydraulic

Dimensions (nominal)

1 µm Cartridges

• Outside Diameter: 2 7⁄10" (6.9 cm)
• Inner Diameter: 1" (2.5 cm)
• Lengths: 10" (25.4 cm)

5 µm Cartridges

• Outside Diameter: 2 7⁄10" (6.9 cm)
• Inner Diameter: 1" (2.5 cm)
• Lengths: 9 3⁄4" (24.8 cm), 20" (50.8 cm)

Recommended Maximum Flow Rates

• 1 µm, 10" (25.4 cm): 1 gpm (3.8 lpm)
• 5 µm, 9 3⁄4" (24.8 cm): 1 gpm (3.8 lpm)
• 5 µm, 20" (50.8 cm): 2 gpm (7.6 lpm)

Flow Rate vs. Differential Pressure

A graph is provided showing the relationship between liquid flow rate (gpm/lpm) and differential pressure (psid/Bar) for 1 µm and 5 µm cartridges, using water at 68°F (20°C). Flow rate is per 10" (25.4 cm) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP). See the official PDF for exact tabulated values.

Performance Specifications

• Filter Grades: 1 or 5 µm
• Chlorine Reduction @ Flow Rate¹:
  • 10" (25.4 cm): >5,000 gallons (18,927 l) @ 1 gpm (3.8 lpm)
  • 20" (50.8 cm): >10,000 gallons (37,854 l) @ 1 gpm (3.8 lpm)
  • ¹Chlorine reduction data is for 2 ppm free chlorine to <0.5 ppm.

Applications

• Water:
  • Drinking: Taste, Odor, Color, Chlorine, Particulate
  • Bottle Washing: Taste, Odor, Color, Chlorine, Particulate
  • Rinse Water: Taste, Odor, Color, Chlorine, Particulate
  • Single Pass: Taste, Odor, Color, Chlorine, Particulate
  • Recirculating: Use Pre-filter
• Chemicals:
  • Single Pass: Oil Vapor, Organics, Taste, Odor, Color, Chlorine
• Gases:
  • Air, Plant: Oil Vapor, Organics, Taste, Odor, Color

Warnings and Cautions

• WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
• NOTE: Some harmless bacteria will attack cellulose media cartridges. If your cartridge seems to disintegrate, or has a “musty or moldy” odor, switch to a synthetic media cartridge or consult Pall.
• CAUTION: Filter must be protected against freezing, which can cause cracking of the filter and water leakage.

Ordering Information

Part numbers follow the format C G P – I, for example, C10P–SCC1.

• G specifies Cartridge Lengths: 9.75" (9 3⁄4"), 10", or 20".
• I specifies Filter Grades: SCC1 (1 µm, 10") or SCC5 (5 µm, 9 3⁄4" and 20").

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. For contractual data, please refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror