Datasheet summary
Pall Schumasiv Ceramic Membrane Filter Elements
Engineering summary from PDF text extraction for Pall Schumasiv Ceramic Membrane Filter Elements. Verify every value with the OEM datasheet.
Summary
Product identification
Pall® ceramic membrane filter elements are made of pure α-Al₂O₃. The membranes themselves consist of Al₂O₃, ZrO₂, or TiO₂, depending on the pore size. These Schumasiv ceramic membrane filter elements are tube-shaped, available in mono and multi-channel configurations. They are designed for applications under abrasive and chemically aggressive conditions, offering high filtration efficiency at high flux rates, such as in oil/water separation.
Membrane Types:
- Microfiltration: α-Al₂O₃ (2 to 0.2 μm)
- Ultrafiltration: ZrO₂ or TiO₂ (0.1 to 0.005 μm)
Applications include:
- Chemical Industry: Process water, acid and lye filtration, catalytic recovery.
- Oil/Water Separation: Compressor condensate filtration, degreasing baths, washing water, coolant lubricants.
- Waste Water: Biomass separation, COD reduction.
- Food and Beverage Industry: Various applications for clarification.
Operating limits
- Maximum Pressure: 15 bar
- Maximum Temperature:
- Epoxy resin sealing: 120 °C
- PTFE sealing: 200 °C
Mechanical / hydraulic
- Support Material: α-Al₂O₃
- Porosity (support): Approximately 33 %
- Chemical Resistance:
- Schumasiv filter elements are resistant against most chemicals.
- Not resistant against HF.
- Epoxy resin resistance is limited against strong acids and polar organic substances like short-chained carboxylic acids and alcohols.
Ordering Information (Schumasiv Microfiltration - MF)
| Unit | Number of Channels | Channel Diameter (mm) | Outer Diameter (mm) | Membrane Surface (m²)¹ | Length (mm)² |
|---|---|---|---|---|---|
| 01/7 | 1 | 7 | 10 | 0.022 | 1000 |
| 01/16 | 1 | 16 | 25.4 | 0.050 | 1000 |
| 07/6 | 7 | 6 | 25.4 | 0.132 | 1000 |
| 19/3.3 | 19 | 3.3 | 25.4 | 0.200 | 1000 |
| 31/2.8 | 31 | 2.8 | 25.4 | 0.292 | 1200 |
| 19/6 | 19 | 6 | 41 | 0.358 | 1000 |
| 37/3.6 | 37 | 3.6 | 41 | 0.418 | 1000 |
| 61/3.1 | 61 | 3.1 | 41 | 0.352 | 1200 |
| 19/8 | 19 | 8 | 52 | 0.478 | 1000 |
¹ at 1000 mm length. ² standard length, 1200 mm possible, other dimensions upon request.
Part Numbers for Specific Membrane Pore Sizes:
- 1.2 μm Membrane (mm):
- 01/7: 88501101
- 01/16: 89582262
- 07/6: 89582267
- 19/3.3: 88519151
- 31/2.8: (not listed)
- 19/6: 88519810³
- 37/3.6: 88537091
- 61/3.1: (not listed)
- 19/8: 89580914³
- 0.6 μm Membrane (mm):
- 01/7: 88501091
- 01/16: 89582263
- 07/6: 89582268
- 19/3.3: 88519311
- 31/2.8: 89581045
- 19/6: 88519611
- 37/3.6: 88537071
- 61/3.1: 89581006
- 19/8: 89580370
- 0.2 μm Membrane (mm):
- 01/7: 88501041
- 01/16: 89582264
- 07/6: 89582269
- 19/3.3: 88519001
- 31/2.8: 89580973
- 19/6: 88519021
- 37/3.6: 88537011
- 61/3.1: 89580975
- 19/8: 88519401
- 0.05 μm Membrane (mm):
- 01/7: 88501051
- 01/16: 89582265
- 07/6: 89582270
- 19/3.3: 88519041
- 31/2.8: 89580972
- 19/6: 88519101
- 37/3.6: 88537001
- 61/3.1: 89580974
- 19/8: 88519391
- 0.005 μm Membrane (mm):
- 01/7: 88501061
- 01/16: 89582266
- 07/6: 89582271
- 19/3.3: 88519081
- 31/2.8: 89581046
- 19/6: 88519421
- 37/3.6: 88537111
- 61/3.1: 89581042
- 19/8: 88519491
³ end sealing with Epoxy resin (all others with PTFE sealing).
General Information
- Module housings are manufactured from stainless steel and are available for all geometries.
- Module housings can be supplied containing up to 28 m² of membrane surface area.
- All connection variations are possible.
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions present in the official OEM PDF datasheet. For contractual data and complete product specifications, refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.