PREcart PP II Filter Cartridges

Summary

Product identification

PREcart PP II filter cartridges are pleated depth filters designed for particle removal in food and beverage applications. They are suitable for process water, wine, and spirits.

Description

The PREcart PP II filter element is engineered for high mechanical resistance and compatibility, meeting the demands of food and beverage production processes.

Materials of Construction

• Filter Medium: Pleated Polypropylene
• Cage, Core, Fin End and End Cap: Polypropylene
• Gasket: Ethylene Propylene Rubber or Silicone Elastomer

Features & Benefits

• Backflush capability for cartridge regeneration: Improves total throughput, reduces overall operating costs.
• Pleated polypropylene filter media with fixed fiber matrix: Broad chemical compatibility, highly stable structure providing consistent filtrate quality.
• Individually serialized cartridges and record controls: Full traceability.
• Cartridges resistant to numerous sanitization cycles and in situ steam sterilization: Cost-effective filtration.

Operating limits

Forward Direction

• 5.0 bard (72.5 psid) @ 25 °C (77 °F)
• 2.0 bard (29 psid) @ 80 °C (176 °F)
• 1.5 bard (21.8 psid) @ 90 °C (194 °F)

Reverse Direction

• 1 bard (1.45 psid) @ 60 °C (140 °F)

Sterilization and Sanitization

• Method: In situ Steam Sterilization
• Maximum Temperature: 134 °C (273 °F)
• Maximum Number of Cycles: 25 x 30 minutes

Product water

PREcart PP II filter cartridge liquid retention ratings are based on a modified OSU-F2 test. The removal efficiency for all grades is 99.98% (ß-5000).

Liquid Removal Rating

• 1 µm
• 2 µm
• 3 µm
• 5 µm
• 10 µm
• 20 µm

Mechanical / hydraulic

Adaptor Types

• SOE – single open end with flat closed end and external 222 O-rings
• SOE – single open end with fin end and external 226 O-rings
• SOE – single open end with fin end and external 222 O-rings
• SOE – single open end with fin end, 3 locking tabs and external 222 O-rings

Nominal Lengths

• 254 mm (10")
• 508 mm (20")
• 762 mm (30")
• 1016 mm (40")

O-ring Seal Material

• Silicone (standard)
• Ethylene Propylene Rubber (EPDM)

Typical Flow Rates Typical initial clean media differential pressure curves for a 254 mm (10") element with water at 20 °C and 1 cP viscosity are provided in the official PDF. See the official PDF for detailed curves.

Quality

Assemblies are manufactured under a Quality Management System certified to ISO 9001:2008.

Compliance

Food Contact Compliance information to specific national legislation and/or regional regulatory requirements should be verified with the manufacturer.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror