Back to Pentair Filtration
Pentair logo

Datasheet summary

CC

Engineering summary from PDF text extraction for CC. Verify every value with the OEM datasheet.

Summary

Product Identification

The Pentair® Pentek® CC Series Granular Activated Carbon Cartridges are designed for potable drinking water filtration. These cartridges utilize coconut shell-based activated carbon.

Models:

  • CC-10
  • CC-20

Features & Benefits

  • Effective reduction of bad taste and odor, and chlorine taste & odor.
  • Greater VOC reduction than standard GAC cartridges.
  • Reduces certain VOCs and MTBE.
  • Produces drinking water of exceptional taste and quality.
  • Includes a post-filter to reduce carbon fines and other suspended particles, permanently fastened to a support basket to eliminate bypass.
  • Internal expansion pad minimizes channeling or bypass.
  • Micron rating: Not rated.

Materials of Construction

  • Filter Media: Granular activated carbon
  • Endcaps: Polystyrene
  • Post-Filter: Spun polypropylene
  • Outer Casing: Polystyrene
  • Expansion Pad: Polypropylene
  • Gaskets:
    • Top: Buna-N
    • Bottom: Santoprene

Operating Limits

  • Temperature Rating: 40-125°F (4.4-51.7°C)

Mechanical / Hydraulic

Model #Part #Maximum DimensionsInitial ∆P (PSI) @ Flow Rate (GPM)*
CC-10155155-432.88" x 9.75" (73 mm x 248 mm)4.5 psi @ 1 gpm (0.3 bar @ 3.8 Lpm)
CC-20155138-432.88" x 20" (73 mm x 508 mm)4.5 psi @ 2 gpm (0.3 bar @ 7.6 Lpm)

*Based on manufacturer's internal testing.

Product Water

Chlorine Taste & Odor Reduction Capacity*

Model #@ Flow Rate (GPM)Capacity
CC-101 gpm7,500 gallons (28,400L)
CC-202 gpm15,000 gallons (56,700L)

*Based on manufacturer's internal testing.

The Pentek CC-10 and CC-20 are Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.

Notes & Warnings

  • Cartridges may contain a very small amount of carbon fines (very fine black powder). After installation, follow instructions for flushing the cartridge to remove fines before using the water. It is recommended to flush the tap at least 20 seconds prior to using water for drinking or cooking purposes, especially if the tap has not been used daily.
  • WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.