Datasheet summary
Coconut Based
Engineering summary from PDF text extraction for Coconut Based. Verify every value with the OEM datasheet.
Summary
Product identification
Pentair® Pentek® Coconut-Based Carbon Block Cartridges are designed for reducing unwanted taste and odor, and chlorine taste & odor from potable drinking water, as well as fine sediment. These cartridges are made from a water-washed, coconut-carbon formulation, featuring an outer wrap to increase useful life by trapping sediment.
They are suitable for residential, food service, commercial, and industrial applications, and can serve as polishing filters or pre-filters.
Features/Benefits:
- Water-washed coconut-carbon formulation
- Enhanced dirt-holding capacity
- Premium high capacity bad taste and odor, and chlorine taste & odor reduction
Materials:
- Filter Media:
- CCBC: Water-Washed Coconut Based Carbon
- CEP: Acid-Washed Coconut Based Carbon
- Endcaps: Polypropylene
- Outer Wrap: Polyolefin
- Netting: Polyethylene
- Gaskets: Buna-N
Operating limits
- Temperature Rating: 40-125°F (4.4-51.7°C)
Feed water
- Warning: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Note: Cartridges may contain a very small amount of carbon fines (very fine black powder). After installation, follow instructions for flushing the cartridge to remove fines before using the water. Flush the tap for at least 20 seconds prior to using water for drinking or cooking, especially if the tap has not been used daily.
Product water
These cartridges are highly effective at reducing unwanted taste and odor, and chlorine taste & odor from potable drinking water. They are also effective at reducing fine sediment.
Mechanical / hydraulic
Specifications and Performance
| Part # | Model # | Maximum Dimensions | Nominal Rating | Initial ΔP @ Flow Rate | Chlorine Taste & Odor Reduction @ Flow Rate | VOC Reduction @ Flow Rate |
|---|---|---|---|---|---|---|
| 155713-43 | CCBC-10 | 2.88" x 9.75" (73 mm x 248 mm) | 1 micron | 3.3 psi @ 1 gpm (0.23 bar @ 3.8 Lpm) | >20,000 gallons @ 1 gpm (75,700L @ 3.8 Lpm) | >800 gallons @ 0.6 gpm (3,028L @ 3.8 Lpm) |
| 155714-43 | CEP-10E | 2.88" x 9.75" (73 mm x 248 mm) | 5 micron | 3.0 psi @ 1 gpm (0.2 bar @ 3.8 Lpm) | >4,000 gallons @ 1 gpm (15,142L @ 3.8 Lpm) | NA |
| 155788-43 | CEP-20E | 2.88" x 20.00" (73 mm x 508 mm) | 5 micron | 3.0 psi @ 2 gpm (0.2 bar @ 7.6 Lpm) | >8,000 gallons @ 2 gpm (30,283L @ 7.6 Lpm) | NA |
Note: All performance data marked with an asterisk () is based on manufacturer's internal testing.*
Certifications
- Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Disclaimer: This summary is generated from an extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.