Datasheet summary
RFFE-10 / 20 BB
Engineering summary from PDF text extraction for RFFE-10 / 20 BB. Verify every value with the OEM datasheet.
Summary
Product identification
The Pentair Pentek RFFE10-BB and RFFE20-BB Filter Cartridges are radial flow iron reduction cartridges designed to reduce dissolved iron from water. They improve taste, help eliminate orange and brown stains in plumbing fixtures, and reduce the possibility of damage to pipes and water heaters. These cartridges add no harmful chemicals to the water, making them safe for drinking water applications.
- Models:
- RFFE10-BB (Part #: 655005-43)
- RFFE20-BB (Part #: 155263-43)
- Compatibility:
- RFFE10-BB: For use in Pentek 10-inch Big Blue® Filter Housing.
- RFFE20-BB: For use in Pentek 20-inch Big Blue® Filter Housing.
- Rating: NR (Nominal)
Product features and benefits
- Easily and effectively reduces up to 3 ppm of dissolved iron from water.
- Improves flavor and reduces the metallic taste caused by iron.
- Reduces the possibility of pipe and water heater damage.
- Helps eliminate orange and brown stains often found in sinks, toilets, tubs, and other plumbing fixtures.
- Adds no harmful chemicals, safe for drinking water applications.
Operating limits
Recommended operating conditions for optimal performance:
- pH: >7.0
- Silica: <100 ppm
- Manganese: <1 ppm
- Iron: <3 ppm
- Iron Bacteria: None
- Hydrogen Sulfide: None
Water conditions outside these limits may lead to a shortened filtration life.
Approximate life of system
The following table provides approximate system life, tested using the Pentek RFFE20-BB in combination with an RFC20-BB Cartridge:
| Iron Level in Water | Total Gallons Water Used | 250 GPD (Four People) | 125 GPD (Two People) | 75 GPD (One Person) |
|---|---|---|---|---|
| 3 ppm | 26,000 gal | 104 days | 208 days | 416 days |
| 2 ppm | 40,000 gal | 160 days | 320 days | 640 days |
| 1 ppm | 80,000 gal | 320 days | 640 days | 1,280 days |
| 0.5 ppm | 160,000 gal | 640 days | 1,280 days | N/A |
Note: If your water contains iron bacteria, shock chlorination is recommended.
Installation and maintenance
- Install the cartridge on the main cold water line after the pressure tank or water meter.
- For best results, pre-sediment and post-carbon treatment is recommended.
- Cartridges may contain a very small amount of carbon fines (very fine black powder). After installation, follow instructions for flushing the cartridge to remove fines before using the water.
- Flush the tap for at least 20 seconds prior to using water for drinking or cooking, especially if the tap has not been used daily.
Warnings and Cautions
- WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.