Datasheet summary
C-155
Engineering summary from PDF text extraction for C-155. Verify every value with the OEM datasheet.
Summary
Product identification
The C-155 Series Electroplating Carbon Cartridges are a premium line of activated carbon filter cartridges specifically designed for electroplating solutions. The product's technology prevents carbon fines from bleeding into the plating bath. It utilizes an ultra-clean, highly purified carbon to ensure sulfur is not leached into the plating bath.
Features/Benefits
- Cellulose-free construction
- Resistant to chemical breakdown in both acidic and alkaline solutions up to 180˚F (82˚C)
- Integrated post-filtration layer to ensure no carbon fines are bled into the plating bath
- Endcap gaskets are permanently molded on to the endcaps to ease filter cartridge change-out
Applications
- Electroplating Solutions
Operating limits
- Temperature rating: 40-180˚F (4.4-82.2˚C)
Mechanical / Hydraulic
Cartridge Specifications
| Model | Max. Dimensions | µ (Nominal) | Initial PSI @ Flow Rate | Case Quantity |
|---|---|---|---|---|
| C-155X10T | 2.63" x 9.75" (67 mm x 248 mm) | 10 | 3.4 psi @ 1 gpm (0.2 bar @ 3.8 Lpm) | 30 |
| C-155X20T | 2.63" x 20" (67 mm x 508 mm) | 10 | 3.4 psi @ 2 gpm (0.2 bar @ 7.6 Lpm) | 30 |
| C-155X30T | 2.63" x 30" (67 mm x 762 mm) | 10 | 3.4 psi @ 3 gpm (0.2 bar @ 11.4 Lpm) | 30 |
| C-155X40T | 2.63" x 40" (67 mm x 1,016 mm) | 10 | 3.4 psi @ 4 gpm (0.2 bar @ 15.1 Lpm) | 12 |
- Custom configurations are available.
Materials of Construction
- Filter Media: Bonded PAC
- Endcaps: Polypropylene
- Netting: Polypropylene
- Gaskets: Santoprene
Performance Notes
- Micron ratings are based on 85% or greater removal of a given particle size.
- Estimated capacity uses 2 ppm free available chlorine at 0.5 ppm breakthrough.
Warnings and Notes
- WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.
- NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder). After installation, a new cartridge should be flushed with sufficient water to remove all traces of fines prior to using the water.
Performance Curves
- Pressure Drop vs Flow Rate: See the official PDF for the graph showing Approximate Net Pressure Drop – psi (Bar) against Flow Rate – gpm (Lpm).
- Efficiency: See the official PDF for the graph showing Sediment Reduction Percent Efficiency against Particle Size (Microns).
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.