Datasheet summary
C-234
Engineering summary from PDF text extraction for C-234. Verify every value with the OEM datasheet.
Summary
Product identification
- C-234 Series Electroplating Carbon Cartridges
- Industrial C-234 Series Modified Molded Block Carbon Cartridges
Features and Benefits
- Provides effective chlorine taste & odor reduction.
- Offers excellent sediment reduction capabilities.
- Ideal choice for applications with high contaminants that lead to premature plugging.
- Modified molded blocks created by proprietary Fibredyne technology, which attaches powdered activated carbon onto a cellulose-free synthetic fiber matrix.
- Combines the benefits of both a sediment filter and a carbon block into a single cartridge.
- Fibredyne’s carbon block technology offers up to two times the chlorine taste & odor reduction and dirt-holding capacity of traditional blocks (based on manufacturer’s internal testing).
- Post-filtration layer fused to the carbon/fiber media blend ensures cartridge will not release fines into the effluent stream.
- Manufactured entirely from FDA-compliant materials.
- Nominal 10 micron rating.
- Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Applications
- Commercial Food Service
- High Sediment
- Industrial
- Residential Water
Cartridge Specifications
| Model | Max. Dimensions | µ (Nominal) | Initial PSI @ Flow Rate | Chlorine Taste & Odor Reduction @ Flow Rate* | Case Quantity |
|---|---|---|---|---|---|
| C-234X10T | 2.63” x 9.75” (67mm x 248mm) | 10 | 3.0 psi @ 1.0 gpm (0.2 bar @ 3.8 Lpm) | >5,000 gallons @ 1 gpm (>18,900 L @ 3.8 Lpm) | 30 |
| C-234X20T | 2.63” x 20” (67mm x 508mm) | 10 | 3.0 psi @ 2.0 gpm (0.2 bar @ 7.6 Lpm) | >10,000 gallons @ 2 gpm (>37,800 L @ 7.6 Lpm) | 30 |
| C-234X30T | 2.63” x 30” (67mm x 762mm) | 10 | 3.0 psi @ 3.0 gpm (0.2 bar @ 11.4 Lpm) | >15,000 gallons @ 3 gpm (>56,700 L @ 11.4 Lpm) | 30 |
| C-234X40T | 2.63” x 40” (67mm x 1,016mm) | 10 | 3.0 psi @ 4.0 gpm (0.2 bar @ 15.1 Lpm) | >20,000 gallons @ 4 gpm (>75,600 L @ 15.1 Lpm) | 12 |
*Estimated capacity using 2 ppm free available chlorine at 0.5 ppm breakthrough.
Materials of Construction
- Filter Media: Bonded PAC
- Endcaps: Polypropylene
- Netting: Polyethylene
- Gaskets: Santoprene
Operating Limits
- Temperature Rating: 40˚-180˚F (4.4˚-82.2˚C)
Performance Data
- Pressure Drop vs. Flow Rate: Refer to the official PDF for graphs illustrating approximate net pressure drop (psi/Bar) versus flow rate (gpm/Lpm).
- Sediment Reduction Efficiency: Refer to the official PDF for graphs illustrating sediment reduction percent efficiency versus particle size (microns).
Important Notes
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Performance capacity depends on system design, flow rate, and certain other application conditions.
- Cartridges will contain a very small amount of carbon fines (very fine black powder); after installation, a new cartridge should be flushed with sufficient water to remove all traces of fines prior to using the water.
- Micron ratings are based on 85% or greater removal of a given particle size.
Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF datasheet. For contractual data, please refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.