Versaflex Series MB

Summary

Product identification

Versaflex Meltblown Polypropylene Filter Cartridges are manufactured from 100% polypropylene, using FDA-listed materials and a thermal-bonding process to seal the meltblown media to the endcaps. This design assures a bypass-free cartridge and maximum process compatibility with a glue-free construction.

These cartridges feature a graded density matrix for high dirt-loading capabilities, delivering superior performance and longer life compared to spun-bonded and stringwound cartridges.

Features/Benefits:

• Nominal efficiency rating
• Chemically compatible in most applications
• High dirt-loading capacity
• Longer life than spun-bonded and stringwound cartridges
• Low pressure drop
• 100% polypropylene
• No surfactants, binders or adhesives used in production
• Manufactured with FDA-listed materials
• Meets USP Class IV biological test for plastics
• Available in lengths from 9.75” to 40”
• Various end cap configurations available to fit existing cartridge housings
• Micron ratings stamped on cartridge for easy identification
• Variety of O-rings available
• Safe, easy incineration and disposal

Applications:

• Finish machining
• Food and beverage
• Oils
• Parts washers
• Pre-filter for RO systems
• Seal protection
• Solvents
• Spray nozzle protection

Operating limits

• Max. Temp. Rating: 160˚F (71.1˚C)
• Max. Differential Pressure: 30 PSIG (2.1 bar) dirty
• Recommended Change Out: 10-15 PSIG (0.7-1.0 bar)

Mechanical / hydraulic

• Diameter: 2.5”
• Available Lengths: 9.75”, 10”, 19.5”, 20”, 29.5”, 30”, 39”, 40”

Pressure Drop vs Flow Rate: See the official PDF for exact tabulated values.

Ordering information

The part number configurator allows for custom configurations. An example part number, VF100-30BMXXXDX, corresponds to:

• VF: Versaflex Filter Cartridge
• Micron rating (µ): 1, 5, 10, 25, 50, 75, 100
• Length (IN.): 9.75, 10, 19.5, 20, 29.5, 30, 39, 40
• Diameter (IN.): B = 2.5
• Cartridge Material: M = Meltblown
• Core: X = None, P = Polypropylene
• Endcap Material: X = None
• Outer Sleeve Style: X = None
• Endcap Style: D = DOE, S = SOE, S2 = 222 Flat, S6 = 226 Flat, F2 = 222 Fin, F6 = 226 Fin, S3 = SOE w/spring, S4 = Polypropylene core extender, P = DOE Polyfoam flat gasket
• Seal Material: B = Buna-N, V = FKM, S = Silicone, E = EPDM, N = Neoprene, X = None

Case Quantity:

• 10”: 30 per case
• 20-40”: 15 per case
• All with endcaps: 15 per case

---

Disclaimer: This summary is based solely on the extracted text. It may not include all figures, footnotes, or the latest revisions present in the official OEM PDF. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror