C44 Single

Summary

Product identification

The C44 Single Liquid Cartridge Housings accommodate one filter element for various flow rates, chemical compatibility, and particle retention needs. They are designed to hold one cartridge in lengths of 10”, 20”, 30”, or 40” (254, 508, 762, 1,016 mm).

Operating limits

• Flow rates: Up to 20 gpm (75.8 Lpm)
• Pressure ratings: 150 and 300 PSI (10.3 and 20.7 bar)

A "Pressure Drop vs Flow Rate" graph is included in the datasheet, showing differential pressure in psi (Bar) against flow rate in gpm (Lpm) for different connection sizes. See the official PDF for exact tabulated values and curves.

Mechanical / hydraulic

• Construction materials:
  • Carbon or Stainless Steel construction
  • Zinc-plated quick-swing closure with eye nuts
  • Buna-N lid seal
  • 316 Stainless Steel cup and spring assemblies
  • 316 Stainless Steel center guide post
  • Two-part epoxy paint inside and outside on carbon steel housings (Note: Carbon steel not recommended for water use as the epoxy coating is not designed as a corrosion inhibitor.)
• Cartridge compatibility:
  • Made to accept double open end cartridges (DOE)
  • Can accept 222 style with closed top cap
• Features:
  • Differential, drain, and vent ports
  • Duplexing for continual flow during maintenance
• Connections: Threaded NPT or Flanged 150 LB A.N.S.I.
  • Available in Style A (Bottom Outlet) or Style B (Side Outlet)
• Dimensions: The datasheet provides detailed tables of approximate dimensions (A, B, C, D, E, F) in inches and millimeters for various cartridge lengths (10”, 20”, 30”, 40”) and connection sizes (0.5” to 2”). See the official PDF for exact tabulated values.

Applications

• Commercial
• General Industrial

Options

• Higher pressure rating
• 226 style cartridge compatibility
• Fin style top
• ASME Code U or UM
• Adjustable support legs

Ordering information

The C44 housing part number can be configured using the following parameters:

• Housing: C44
• Length (in.): 10, 20, 30, 40
• Connection (in.): 0.50, 0.75, 1, 1.25, 1.50, 2
• Connection type: N = NPT, F = Flange
• Outlet location: A = Bottom, B = Opposite Side
• Material: C = Carbon Steel, 4 = 304 SS, 4L = 304L SS, 6 = 316 SS, 6L = 316L SS
• Element base / top:
  • D = DOE (Double Open Ended)
  • 22 = 222 Style
  • 26 = 226 Style
  • S = Single Open End
  • F = Fin Style
  • None = DOE (if DOE, it is only required once in the part number and specifies both top and base)
• PSI: 15 = 150, 30 = 300, 50 = 500
• ASME Code: U = (U) Stamp, UM = (UM) Stamp, None = No Stamp

Cartridges are not included but must be specified when ordering the housing.

---

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data should always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror