C88 6 - Round

Summary

Product identification

The C88 6-Round Liquid Cartridge Housings provide versatility in choosing cartridges based on flow rates, chemical compatibility, and particle retention.

• Accommodates: 6 elements in 20”, 30” or 40” (254, 508, 762, 1016 mm) lengths
• Applications:
  • Commercial
  • General Industrial

Operating limits

• Flow rates: Up to 120 gpm (454.2 Lpm)
• Pressure ratings: 150 PSI (10.3 bar) and 300 PSI (20.7 bar)

A pressure drop vs. flow rate graph is provided in the official PDF, showing curves for various connection sizes (0.75”/1”, 1.25”/1.5“, 2”, 3”, 4”). See the official PDF for exact tabulated values.

Mechanical / hydraulic

• Construction Materials: Carbon Steel or Stainless Steel
• Lid Closure: Zinc-plated quick-swing closure with eye nuts
• 300 PSI (20.7 bar) Housing: Features a slip and blind flange lid
• Lid Seal: Buna-N
• Internal Components:
  • 316 Stainless Steel cup and spring assemblies
  • 316 Stainless Steel center guide post
• Ports: Differential, drain, and vent ports
• Support: Adjustable support legs
• Coatings (Carbon Steel): Two-part epoxy paint inside and outside
• Cartridge Compatibility:
  • Made to accept double open end cartridges (DOE)
  • 222 style with closed top cap*
  • 226 style cartridge compatibility (option)
  • Single Open End (S) (option)
  • Fin style top (F) (option)
  • Note: Type of element top must be specified at the time of order.
• Optional Features:
  • Duplexing for continual flow during maintenance
  • Higher pressure rating
  • ASME Code U or UM Stamp

Approximate Dimensions:

Ordering Information

To create an ordering part number, use the following configurator:

Example: C88202NBCD15U (C88 housing, 20” length, 2” connection, NPT connection, Outlet on opposite side, Carbon steel, Double open ended element, 150 psi, ASME (U) Stamp)

• HOUSING: C88
• LENGTH (IN.): 20, 30, 40
• CONNECTION (IN.): 2, 3, 4
• CONNECTION TYPE:
  • N = NPT
  • F = Flange
• OUTLET LOCATION:
  • A = Bottom
  • B = Opposite Side
• MATERIAL:
  • C = Carbon Steel
  • 4 = 304 SS
  • 4L= 304L SS
  • 6 = 316 SS
  • 6L = 316L SS
  • Note: Carbon steel not recommended for water use as the epoxy coating is not designed as a corrosion inhibitor.
• ELEMENT BASE*:
  • D = DOE (Double Open End)
  • 22 = 222 Style
  • 26 = 226 Style
  • S = Single Open End
  • Note: If DOE, it is only required once in the part number and will specify both top and base.
• ELEMENT TOP*:
  • F = Fin Style
  • None = DOE
• PSI:
  • 15 = 150
  • 30 = 300
• ASME CODE:
  • U = (U) Stamp
  • UM = (UM) Stamp
  • None = No Stamp
  • *Cartridges are not included but must be specified as to the type used when ordering the housing.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. For contractual data and complete specifications, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror